Your cart is currently empty!
Dobinsons 30mm (1.2″) Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only designed to be used with OE height leaf springs
- Built-in correction for pinion angle
- Full vehicle range is listed down below
- Installation Instructions
$165.00
In Stock
Description
Dobinsons Spring & Suspension offer these 30mm (1.2)” spacer lift blocks and suitable u-bolts to fit the rear of the Toyota Tacoma 1st, 2nd and 3rd Gen from 1998 to 2023, Toyota Tundra 1st and 2nd Gen from 2000 to 2021, Toyota Hilux Vigo and Revo from 2005 to 2023, and Nissan Frontier D21, D22, and D40 from 1985 to 2023. Designed to work with the original leaf springs, these lift blocks will give a quick 1.0″ of lift over stock height. They are only intended to be used with stock height springs.
The spacer blocks are cast, and correct for rear caster, and the u-bolts are zinc coated (gold colored) and suited to match the OE leaf springs and spacer blocks.
As this is only a 30mm lift over stock height, original leaf springs and shocks can still be used with these blocks and new u-bolts. The u-bolts supplied are longer than stock due to the additional thickness. These may not be suitable with a u-bolt flip kit unless you use longer u-bolts to compensate for the 30mm thick blocks. The blocks in this kit are not sold separately.
Suits the following vehicles:
1998 Toyota Tacoma 4×4 and PreRunner
1999 Toyota Tacoma 4×4 and PreRunner
2000 Toyota Tacoma 4×4 and PreRunner
2001 Toyota Tacoma 4×4 and PreRunner
2002 Toyota Tacoma 4×4 and PreRunner
2003 Toyota Tacoma 4×4 and PreRunner
2004 Toyota Tacoma 4×4 and PreRunner
2005 Toyota Tacoma 4×4 and PreRunner
2006 Toyota Tacoma 4×4 and PreRunner
2007 Toyota Tacoma 4×4 and PreRunner
2008 Toyota Tacoma 4×4 and PreRunner
2009 Toyota Tacoma 4×4 and PreRunner
2010 Toyota Tacoma 4×4 and PreRunner
2011 Toyota Tacoma 4×4 and PreRunner
2012 Toyota Tacoma 4×4 and PreRunner
2013 Toyota Tacoma 4×4 and PreRunner
2014 Toyota Tacoma 4×4 and PreRunner
2015 Toyota Tacoma 4×4 and PreRunner
2016 Toyota Tacoma 4×4 and PreRunner
2017 Toyota Tacoma 4×4 and PreRunner
2018 Toyota Tacoma 4×4 and PreRunner
2019 Toyota Tacoma 4×4 and PreRunner
2020 Toyota Tacoma 4×4 and PreRunner
2021 Toyota Tacoma 4×4 and PreRunner
2022 Toyota Tacoma 4×4 and PreRunner
2023 Toyota Tacoma 4×4 and PreRunner
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
2007 Toyota Tundra
2008 Toyota Tundra
2009 Toyota Tundra
2010 Toyota Tundra
2011 Toyota Tundra
2012 Toyota Tundra
2013 Toyota Tundra
2014 Toyota Tundra
2015 Toyota Tundra
2016 Toyota Tundra
2017 Toyota Tundra
2018 Toyota Tundra
2019 Toyota Tundra
2020 Toyota Tundra
2021 Toyota Tundra
2005-2023 Toyota Hilux
1985 to 2022 Nissan Frontier and Navara
Related products
-
DobinsonsDobinsons C59-327 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm free height, 18mm wire diameter, 271LBF/IN Spring Rate
$270.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesETA is Summer 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
$305.00 Select options
