Dobinsons Build-A-Kit Toyota 4Runner 2010-24 (All Options 0-3.5″)

  • Suits Toyota 4Runner 5th Gen 4×4 Models 2010-2024, with or without KDSS
  • If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Add up how much accessory weight you have on the front and then the rear, that’s your constant load
  • Then choose the lift height from the coils that most closely matches the added weight
  • Dobinsons Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel, linear rate
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs – Select your preferences
  • You can go from a standard suspension to full long travel with all the options listed here
  • The more lift height you add, the more parts you need, so read the subsection headings below
  • Learn more about the 3 different shock types on this blog post
  • Suspension Installation Video
  • All Dobinsons parts have a full 2 year warranty

From $1,200.00

In Stock
Select Front Coils
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-238 - Stock front end, low height 3/4" to 1"
C59-296 - Stock front end, 1.5" lift
C59-300 - Stock front end, 1.75-2.0" lift
C59-302 - Stock - 2.5" | with 110-150lbs constant load - 2"
C59-314 - 3" with 110lbs | 2.5" with 110-220lbs constant load
C59-350 - With 220-300lbs constant load - 1.5" | Heavy spring rate coils
C59-352 - With 220-300lbs constant load - 2" | Heavy spring rate coils
C59-354 - With 220-300lbs constant load - 2.5" | Heavy spring rate coils
Select Coil Spring Color
Select your preferred color of the coil springs. If it is not available, we will contact you with an ETA or options. Applies to Front and Rear
Select Front Struts
Ending with 700 is the standard replacement front struts with a standard coil seat height | Ending with 574 is an extended travel version that adds 1″ lift due to a raised coil seat. Using these with a raised coil will add 1″ to whatever lift height the coil lists. Example: GS59-574 with C59-302 and stock weight will yield ~3.5″ of lift.
GS59-700 - Twin Tube Standard seat height - coils give lift (0-2.5", YELLOW ONLY)
GS59-574 - Twin Tube Extended Travel - Raised seat height, adds 1" lift to coils
IMS59-50700 - IMS non-resi monotube, adjustable height (0-2.5")
IMS59-50574 - IMS non-resi monotube Extended travel (2-3.5" lifts)
MRA59-A700 - MRA 3-way adjustable w/resi monotube (0-2.5" lifts)
MRA59-A574 - MRA 3-way adj w/resi monotube Extended travel (2-3.5" lifts)
Select Color of Struts and Shocks
Dobinsons IMS and MRA are black only, but the twin tubes are offered in yellow or black. Choose here and if that is not available, we will contact you with an ETA or options. GS59-700 is only made in yellow now
Select Rear Coils
Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4"
C59-323 - Stock height up to 1/2" lift
C59-599 - 1.25-1.5" with stock weight
C59-505 - 1.75-2.0" with stock weight
C59-325 - 2.25-2.5" with stock weight
C59-327 - 2-2.25" with 200-400lbs constant load
C59-329 - 2" with 500-800lbs constant load
C59-331 - 2" with 800-1200lbs constant load (teal only)
C59-675V - 3" long travel, stock weight
C59-677V - 3" long travel, 200-400lbs constant load
C59-701V - 3" long travel, 500-600lbs constant load
C59-749V - 3" long travel, 800-1000LBS constant load, super extra heavy
C59-849V - 3" long travel, 1000LBS+ constant rear load (TEAL ONLY)
Select Rear Shocks
Only those people looking to do a full long travel rear can order the ***575 shocks. They will cause issues if you don’t have the correct replacement brake lines, bump stops, and sway bar links in place.
KDSS vehicles CANNOT use long travel rear shocks
GS59-705 - Twin Tube Comfort valved for light rigs (0-2.5" lift)
GS59-701 - Twin Tube Suits light to heavy loaded rigs (0-3" lift)
GS59-575 - Twin Tube LONG TRAVEL, not for KDSS (3"+ lift only)
IMS59-50701 - IMS non-resi monotube (0-3" lift)
IMS59-50575 - IMS non-resi monotube for 3"+ LONG TRAVEL only, not for KDSS
MRA59-A701 - MRA 3-way adjustable w/resi monotube (0-3" lift)
MRA59-A575 - MRA 3-way adj w/resi monotube long travel 3"+ lifts only, not for KDSS
Add Front Brake Lines?
Replacement brake lines aren't required for the front of this vehicle, however adding stainless braided brake lines front and rear will increase the pedal feel and braking performance
Add Extended Rear Brake Lines?
If you've chosen the **575 Long Travel rear shocks, new extended rear brake lines are required with these shocks
Add New UCA's?
New Upper Control Arms (UCA's) can greatly increase the quality of the wheel alignment, mainly in the caster setting, improving steering and handling. Should be used for 2.5″ or more of lift
Add a Diff Drop Kit?
Diff drop kit is for 3″+ lift, or when using 574 long travel struts to avoid CV binding at full droop
Add New Strut Mounts and/or Assembly?
Here you can add new strut mounts and hardware, or also have the struts pre-assembled prior to shipping
Add Front or Rear Lean Correction Spacer?
If your vehicle already leans to one side, add this to the low side during assembly. KDSS vehicles should use the Treaty Oak Spacer Kit in the next section when lifting 2" or more. A 1/4" front spacer adds 1/2" of lift. Rear is 15mm (1/2") of lift.
Add KDSS Spacer Kit?
Treaty Oak Offroad designed their KDSS spacer kit to not only help prevent a vehicle lean left to right but also to soften up the suspension after it's been lifted by re-aligning the sway bars front and rear back to a more neutral position. This also gains panhard rod clearance when using longer shocks.
Add Rear Panhard Rod?
For lifts of 3" or more, a heavy duty adjustable panhard rod will allow you to re-center your axle. This can also be used with any height, but for those needing a stronger panhard rod than stock
Add New Front High-Clearance CV Boots?
If your vehicle is older, and you plan to lift 3" or more, new Dobinsons high-clearance CV boots are a great option
Add Front Swaybar Relocation Kit? (only non-KDSS vehicles)
The Dobinsons front swaybar relocation kit lowers and positions the front sway bar (non KDSS models only) back to a proper working angle when lifted 2" or more.
Add Extended Front Swaybar links? (only non-KDSS vehicles)
Factory sway bar links are prone to bending and breaking and can even puncture your CV boots. All-Pro's heavy-duty Toyota front sway bar links replace the weak stock links using top quality Teflon lined 3/4" Heim Joints and hefty .156 wall DOM tubing.
Add Extended Rear Swaybar links? (only non-KDSS vehicles)
For 2" or more, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this
Add Front Bump Stops?
If you regularly offroad, extending your bump stops helps reduce the harsh impact when the front bottoms out. Click the small box to the right of the product for more information.
Add Rear Bump Stops?
For those who regularly offroad and stand a chance to bottom out more often, or for those running the 575 long travel shocks, new bump stops should be added
Add New Rear Trailing Arms?
For heavy offroading, or for true long travel, new upper and lower adjustable trailing arms help correct pinion angle, give better articulation, and are much much stronger than stock
Add Rear Trailing Arm Skids?
Protect the vulnerable rear lower link mounts on your vehicle with a pair of lower link skids from RCI Metalworks
Add Rear Lower Shock Mount Skids?
Protect your rear low hanging shock mounts with RCI heavy duty rear shock mount skid plates
Add Airbags?
If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of Firestone helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height.
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors
Upgrade Rear Brakes?

Description

You have found the Dobinsons 4Runner lift kit page of Exit Offroad.  Dobinsons offers this complete suspension system for the 2010-2024 Toyota 4Runner 5th Generation 4.0L V6, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height.  You can start with a basic kit of 4 coils and shocks/struts, or you can build it up with as many options as you would like.  Contact us directly if you have questions before ordering.

Dobinsons suspension is one of the most popular and highly sought-after suspension systems offered for Toyota 4Runners in the USA.  Why are people always looking for it?  It’s because you’ll be hard pressed to find any negative reviews of the products anywhere online.  Check out the web forums such as T4R.org and 4Runners.com in addition to IH8MUD.com and you’ll see plenty of reviews and customer feedback and questions for all the Toyota offerings from Dobinsons.  The proof is right there, listen to what the people have to say.

Dobinsons 4runner lift kits are designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons 4runner lift kit Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons 4runner lift kit coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

 ***2.5″ or more of lift, new UCA’s are recommended***
NOTE: For a lift of 3″ in the rear, new extended brake lines and minimum of 2″ bump stop extensions are required to be used with our long travel rear shocks.  At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.
Check out more videos on our YouTube page: https://www.youtube.com/exitoffroad

2010 Toyota 4Runner Lift Kit
2011 Toyota 4Runner Lift Kit
2012 Toyota 4Runner Lift Kit
2013 Toyota 4Runner Lift Kit
2014 Toyota 4Runner Lift Kit
2015 Toyota 4Runner Lift Kit
2016 Toyota 4Runner Lift Kit
2017 Toyota 4Runner Lift Kit
2018 Toyota 4Runner Lift Kit
2019 Toyota 4Runner Lift Kit
2020 Toyota 4Runner Lift Kit
2021 Toyota 4Runner Lift Kit
2022 Toyota 4Runner Lift Kit
2023 Toyota 4Runner Lift Kit

2024 Toyota 4Runner Lift Kit


You may also like…