Dobinsons Adjustable Front Poly Caster Bushing Kit 0° 2.5° 3.5° | Land Cruiser

  • For 0″ to 4″ of lift, Recommended when replacing 20+ year old suspension parts
  • Contains all 4 bushings for the front of the radius arm to axle
  • Can be set to 3 different caster settings quite easily
  • The inner core can be slid out and rotated to go to the next caster setting without requiring a press
  • This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
  • Dobinsons offer other separate bush kits for Caster and Radius Arms. Contact us for more information
  • Installation Instructions

$140.00

In Stock

Description

PB59-503K Polyurethane bushes have been designed and manufactured by Dobinsons Spring & Suspension from the highest quality raw materials.

This PB59-503K Adjustable Front Radius Arm Caster Bushing Kit is designed for the 1990-97 Toyota Land Cruiser 80 Series Wagon and Land Cruiser 105 Series.

The kit provides 4 x Polyurethane Eccentric Bushes / Bushings with a built-in sleeve to adjust caster setting from 0° to 2.5° or 3.5° of correction

Caster angle plays a major part in vehicle straight line stability and helps the steering to return to center. If the vehicle’s suspension has been raised, the required positive caster angle is reduced and the caster angle moves closer to zero, impairing the vehicles steering stability. A wheel alignment done by a reputable 4×4 wheel alignment center can determine what level of caster correction is required and use the PB59-503K kit to set it properly.

Dobinsons Spring & Suspension offer a full variety of suspension components for this vehicle, including replacement bushings for all control arms front and rear. A complete bush kit is available, part PB59-1258K. Contact Dobinsons for more information.  Dobinsons also make a rubber caster bushing kit that is not adjustable, part number RB59-522K.

For suspension lift kits between 50mm/2″ and 90mm/3.5″ caster correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application.

For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Caster correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required.

Note: For Off Road Use Only

Vehicle Fitment:

1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series

You may also like…

  • Dobinsons RB59-534K rubber bushing kit
    80 Series Land Cruiser (1990-1997)

    Dobinsons Front Axle-End Radius Arms Bushings Kit, OE Rubber Replacement Land Cruiser 80 Series

    • For any lift height, or no lift. These are OE replacement rubber bushings.
    • High quality rubber, producing the highest ride quality
    • Pressing of bushings is required during installation
    • Replaces OE bushings holding front radius arms to the axle in all 4 positions

     

    $170.00 Add to cart
  • Dobinsons RB59-534K rubber bushing kit
    80 Series Land Cruiser (1990-1997)

    Dobinsons Front Rubber Bushings, Radius Arm to Chassis (Fixed End) for Land Cruiser 80 Series

    • For any lift height, or no lift. These are OE replacement bushings.
    • High quality rubber, producing the highest ride quality
    • Pressing of bushings is required during installation
    • Replaces OE bushings holding front radius arms to the frame
    $110.00 Add to cart