Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460

  • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
  • Order 1 for 1 vehicle
  • Heavy Duty, zinc plated, with high quality ball joint ends for long life
  • Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
  • Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
  • Adjustable to suit lift heights of 2″ to 4″
  • Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
  • Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video.  Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary

$200.00

In Stock

Description

4Runner Sway bar Links

4runner sway bar links (Dobinsons SE59-529) – These are adjustable sway bar extensions to suit 2″ to 4″ of lift, allowing your sway bar to work properly and reset back to it’s factory riding angle on the road. Adjust the rod length according to your lift height, and so that the sway bar is riding as close to a factory position as possible. The base setting should be to add half of your lifted height to the stock length. Take new links, make them the same length as stock, then add exactly half of the lifted lift height amount to them, and check for clearances. If they’re set too long, they will contact the trailing arm. Gold zinc plated, high quality OE style ball end joints, sealed for long life, this kit includes all that you will need.
NOTE: 4runner sway bar links Will NOT work on any vehicle with KDSS
Suits these vehicles:
Toyota 4Runner 4th and 5th Gen (without KDSS) 2003-2024
Toyota FJ Cruiser All Years
Lexus GX470 (without KDSS)
Lexus GX460 (without KDSS)
Many people don’t realize that when lifting their vehicle, the sway bar angle because a lot steeper than normal, and this actually affects the wheel travel and ride comfort inside the vehicle.  The sway bar links are literally stretched out and causing a type of binding on the rear sway bar not being able to do its job properly.  By changing out the original swaybar links to the 4runner swaybar links by Dobinsons, you can set the angle back to a more neutral position, gaining wheel travel, gaining ride comfort, and also helping the swaybar to properly assist the vehicle in keeping it more level when cornering.  These 4runner swaybar links should be used at any lift height of over 1.5″ so that you get the proper articulation from your new suspension kit, and are required with a lift height of 2.5″ or more.  You’ll also notice that if you don’t have longer sway bar links installed, reinstalling the original links can be quite difficult as they’re very tight on a lifted Toyota or Lexus SUV.
To see a video of this product, click here: https://youtu.be/lZACSaE2PHI

Vehicle Fitment:

2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner

2024 Toyota 4Runner

2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470

2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460

2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser