Your cart is currently empty!
Dobinsons Front Sway Bar Extension Set for Toyota Land Cruiser 70 and 80 Series
- Toyota Land Cruiser 80 series, only 9/1991 plus models, and Also suits LJ78, LJ79, RJ77, KZJ78
- For 2″ to 6″ lift heights
- Zinc plated steel with all hardware supplied
- Simple bolt-on design
- Reduces bushing wear and corrects sway bar angle to function properly
- Sold as a pair, 1 needed per vehicle
$90.00
In StockDescription
Dobinsons Spring & Suspension front Swaybar Extensions to suit 2″ to 6″ of lift on Toyota Land Cruiser 80 series, only 9/1991+ models. Also suits LJ78/79, RJ77, KZJ78. These are fixed brackets once installed and will take the pressure off your sway bar and sway bar bushings, allowing them to work properly.
Corrects the position of the sway bar when the vehicle is lifted 2″ or more, providing better handling.
NOTE: These are sold as a pair.
For suspension lift kits between 75mm/3″ and 90mm/3.5″ castor correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application.
For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Castor correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required.
Note: For Off Road Use Only
Vehicle Fitment:
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
Related products
-
Dobinsons
Dobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
$305.00 Select options -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart -
Dobinsons
Dobinsons C59-323 Stock Height Rear Coil Springs for GX460 GX470 FJ 4Runner 03-23
- Suits Lexus GX470, GX460 and 2003-2024 Toyota 4Runner and FJ Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm, 17mm wire, 220LB Rate
- Note: Whilst these were made as stock replacement springs, some customers report a little lift over OE stock height. They should sit between 22-22.5″ from the center of the hub up to the fender. Variations in vehicle models, weight, and how the vehicle is loaded can affect the final ride height
- If you regularly tow or carry heavy loads, consider adding the Timbren SES Kit for added support
$270.00 Select options -
ExceptionsShips FREE !!
within 48 US StatesDobinsons MRA59-A575 3-Way Adjustable MRA Long Travel Rear Shocks
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 & GX460 without KDSS, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- CANNOT BE USED WITH KDSS
- 3-way adjustable valving – adjust high and low speed compression and rebound
- MRA59-A575 – Specifications. 730mm extended, 443mm compressed
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Can Use with Timbren Rear Bump Stop Kit
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stops extensions or longer bump stops are required!!
- Full 2 year limited warranty, no set rebuild time period
- Now comes with a longer hose and different mounting instructions
$1,280.00 Add to cart