Your cart is currently empty!
Ships FREE !!
within 48 US States
within 48 US States
Dobinsons IMS59-60682 Rear IMS Shocks | Sequoia + Land Cruiser 80/100/200 0-3″
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- 610mm extended, 389mm compressed
$650.00
In Stock
SKU: IMS59-60682
Categories: 100 Series Land Cruiser IFS (1998-2007), 200 Series Land Cruiser (2008-2021), 80 Series Land Cruiser (1990-1997), Dobinsons, Exceptions, IMS Monotube, LX470, Sequoia 1st Gen (2001-2007), Shocks - 100 Series, Shocks + Struts - 200 Series, Struts + Shocks - Sequoia 1st Gen, Struts and Shocks, Suspension
Brand: Dobinsons Spring & Suspension
Description
Pair of rear Dobinsons IMS59-60682 Internal Reservoir Monotube shocks for Toyota Land Cruiser 80 Series 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2020, as well as 2001-2007 Sequoia, suitable for 0 – 3″ of lift. They do come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
You’ll be hard pressed to find anyone saying anything negative about the ride quality and performance of Dobinsons IMS shocks on any Land Cruiser model!!
Dobinsons IMS59-60682 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilizing the Monotube design, Dobinsons IMS59-60682 IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Vehicle Fitment:
1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1998 Toyota Land Cruiser 100 Series
1999 Toyota Land Cruiser 100 Series
2000 Toyota Land Cruiser 100 Series
2001 Toyota Land Cruiser 100 Series
2002 Toyota Land Cruiser 100 Series
2003 Toyota Land Cruiser 100 Series
2004 Toyota Land Cruiser 100 Series
2005 Toyota Land Cruiser 100 Series
2006 Toyota Land Cruiser 100 Series
2007 Toyota Land Cruiser 100 Series
2008 Toyota Land Cruiser 200 Series
2009 Toyota Land Cruiser 200 Series
2010 Toyota Land Cruiser 200 Series
2011 Toyota Land Cruiser 200 Series
2012 Toyota Land Cruiser 200 Series
2013 Toyota Land Cruiser 200 Series
2014 Toyota Land Cruiser 200 Series
2015 Toyota Land Cruiser 200 Series
2016 Toyota Land Cruiser 200 Series
2017 Toyota Land Cruiser 200 Series
2018 Toyota Land Cruiser 200 Series
2019 Toyota Land Cruiser 200 Series
2020 Toyota Land Cruiser 200 Series
2021 Toyota Land Cruiser 200 Series
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia
You may also like…
-
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A682 3-Way Adjustable MRA Rear Shocks | 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2021, Sequoia 2001-2007, suitable for 0 – 3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 620mm extended, 390mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart
Related products
-
ExceptionsShips FREE !!
within 48 US StatesDobinsons MRA59-A220 3-Way Adjustable MRA Front Struts Extended Travel
- Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Resi brackets bolt in between the stock front sway bar mount
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart -
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
$305.00 Select options -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
Dobinsons
Dobinsons C59-476 1.75″ Front Coils for Toyota Sequoia 2008-2022 5.7L V8
- Dobinsons C59-476 Front 45mm Lift Coils, sold as a pair – suits Toyota Sequoia 2008 to 2022 5.7L V8 models
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 367mm free height, 19mm wire, 685LBF/in rate
- Sold in Pairs
$405.00 Add to cart
