Dobinsons Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021 Double Cab 4×4 V8

  • Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Photos show full kit with most options purchased – choose what you’d like
  • Coils are specifically suited to provide comfort and lift
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Choose your desired suspension parts to build the kit best suited to your weight
  • IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
  • 4 Clip height settings. Lowest height is stock/OE height.  Each clip height adds approximately 1/2″ of lift.  Use clip heights to fine tune lift height or offset for vehicle lean
  • FRONT ASSEMBLY INSTRUCTIONS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period

From $2,485.00

In Stock
Select Front Coils
2.5" - C59-778 - Stock weight (662LBF/in spring rate)
2.25" - C59-610 - With bumper and winch weight (737LBF/in spring rate)
3.0" - C59-780 - Stock weight (662LBF/in spring rate)
3.0" - C59-578 - With bumper and winch weight (662LBF/in spring rate)
Select Coil Color
Choose your preference. If that color is not in stock, we will contact you with options or an ETA
Select Front Struts
IMS59-60710 - IMS internal Resi 2.6" Body Monotube Struts for 0-3" of lift, adjustable height
Select Rear Leaf Springs
Based on how much weight you carry in your truck, select the appropriate springs
L59-120-R - 2.25" - Light to Medium Loads up to 330LBS constant load
L59-121-R - 2.25" - Heavy Load 330-770LB constant load
L59-122-R - 2.25" - Very Heavy Load 1000LBS+ constant load full leaf pack
Select Rear Shocks
IMS59-60711 - IMS internal Resi 2.6" Body Monotube Shocks for 0-2.5" of lift
Add Bushing Kit and/or Greasable Pins
Leaf springs do not come with bushings. Add Dobinsons greasable bushing kit and pair of greasable pins/bolts for the fixed end of the leaf springs
Add Greasable Shackles?
Sold as a kit, these replace the factory shackles to allow you to grease the bushings without disassembling the vehicle
Add U-bolts for Leaf Springs?
New U-bolts should be installed with new leaf springs. Select those here unless you're planning to do a U-bolt Flip Kit
Add Front Upper Control Arms (UCA's)?
New UCA's help correct the steering geometry and ride quality while increasing wheel travel. Can be used at any height but are required at 3" of lift
Add a Diff Drop Kit?
If lifting 3" in the front, a diff drop kit helps reduce the angle on the CV joints
Add new strut mounts and/or assembly?
Here you can add new strut mounts and hardware, or also have the struts pre-assembled prior to shipping
Need a Front Lean Spacer?
Some older Toyota's tend to lean on the driver's side. If yours is leaning now, it will lean more once lifted. Adding this 1/4" spacer will add 1/2" of lift to correct the lean
Add Front Bump Stops?
For those who offroad often and also have more risk of bottoming out, new higher quality front bump stops will ease the hit and help protect other components
Add Rear Bump Stops?
If your truck is older already, the stock bump stops may be deteriorated and not working as well. New bump stops fit in with the u-bolts during leaf spring installation. Don't order if you're adding airbags!!
Need a Rear Airbag Kit?
If the loads you put into the back of your truck vary a lot, an airbag kit from Firestone can help you balance out the load and not squat too much. Includes Firestone Airbag Kit and Daystar Cradle Kit
Add New CV Boots?
When lifting an older vehicle, the age of the CV boots will show very quickly due to the new ride height. Changing out all the CV boots may be necessary depending on the age and mileage
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 18" wheels for caliper clearance)
Upgrade Rear Brakes?

Description

Dobinsons Tundra Suspension – Dobinsons offer this complete 2.25″ to 3.0″ IMS suspension system for the 2007 to 2021 Toyota Tundra 4×4 Double Cab, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement suspension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and medium load rear leaf springs with bushings, pins and u-bolts.  Additional parts can be added for a more complete suspension.

dobinsons IMS specifications specs sheet

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons Tundra 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Photos of products may differentiate based on preferences chosen and vehicle models.

All component are also available separately if required.  Follow the link here for more information on the individual components: https://exitoffroad.com/product-category/toyota/tundra/tundra-2nd-gen

2007 Toyota Tundra Lift Kit
2008 Toyota Tundra Lift Kit
2009 Toyota Tundra Lift Kit
2010 Toyota Tundra Lift Kit
2011 Toyota Tundra Lift Kit
2012 Toyota Tundra Lift Kit
2013 Toyota Tundra Lift Kit
2014 Toyota Tundra Lift Kit
2015 Toyota Tundra Lift Kit
2016 Toyota Tundra Lift Kit
2017 Toyota Tundra Lift Kit
2018 Toyota Tundra Lift Kit
2019 Toyota Tundra Lift Kit
2020 Toyota Tundra Lift Kit
2021 Toyota Tundra Lift Kit

 

You may also like…

  • Dobinsons SP59-060 greasable pin bolt kit for leaf springs
    Dobinsons

    Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)

    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Kit includes 2 greasable bolts, as shown in the photo
    • Order 2 kits if you want to replace fixed and shackle end bolts
    • Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+.  See full vehicle list below

     

    $60.00 Add to cart