Your cart is currently empty!
Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
$227.95
In StockDescription
Tundra and Tacoma AAL Set
The ICON Vehicle Dynamics Progressive Tundra and Tacoma AAL Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
- Warranty Info
What is a Tundra or Tacoma AAL (Add-A-Leaf)?
An add-a-leaf (AAL) is an extra leaf added to a vehicle’s leaf spring pack to increase its carrying capacity, reduce sway, or increase ride height. AAL kits are a more economical and easier-to-install alternative to replacing the existing leaf springs. Depending on the vehicle, adding a leaf can raise the rear of a vehicle by 0.5–3 inches.
Vehicle Fitment:
1995 Toyota Tacoma AAL Set
1996 Toyota Tacoma AAL Set
1997 Toyota Tacoma AAL Set
1998 Toyota Tacoma AAL Set
1999 Toyota Tacoma AAL Set
2000 Toyota Tacoma AAL Set
2001 Toyota Tacoma AAL Set
2002 Toyota Tacoma Add-A-Leaf Set
2003 Toyota Tacoma Add-A-Leaf Set
2004 Toyota Tacoma Add-A-Leaf Set
2005 Toyota Tacoma Add-A-Leaf Set
2006 Toyota Tacoma Add-A-Leaf Set
2007 Toyota Tacoma Add-A-Leaf Set
2008 Toyota Tacoma Add-A-Leaf Set
2009 Toyota Tacoma Add-A-Leaf Set
2010 Toyota Tacoma Add-A-Leaf Set
2011 Toyota Tacoma Add-A-Leaf Set
2012 Toyota Tacoma Add-A-Leaf Set
2013 Toyota Tacoma Add-A-Leaf Set
2014 Toyota Tacoma Add-A-Leaf Set
2015 Toyota Tacoma Add-A-Leaf Set
2016 Toyota Tacoma Add-A-Leaf Set
2017 Toyota Tacoma Add-A-Leaf Set
2018 Toyota Tacoma Add-A-Leaf Set
2019 Toyota Tacoma Add-A-Leaf Set
2020 Toyota Tacoma Add-A-Leaf Set
2021 Toyota Tacoma Add-A-Leaf Set
2022 Toyota Tacoma Add-A-Leaf Set
2023 Toyota Tacoma Add-A-Leaf Set
1999 Toyota Tundra AAL Set
2000 Toyota Tundra AAL Set
2001 Toyota Tundra AAL Set
2002 Toyota Tundra AAL Set
2003 Toyota Tundra AAL Set
2004 Toyota Tundra AAL Set
2005 Toyota Tundra AAL Set
2006 Toyota Tundra AAL Set
Additional information
| Weight | 38 lbs |
|---|---|
| Dimensions | 46 × 8 × 4 in |
7 reviews for Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
You must be logged in to post a review.
Related products
-
80 Series Land Cruiser (1990-1997)Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75,77, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews)
Paul (verified owner) –
Value for money, super satisfied.
Adam (verified owner) –
*****
Jason (verified owner) –
Very good customer service, super friendly.
Jesse (verified owner) –
*****
Eric (verified owner) –
Value for money, super satisfied.
Travis (verified owner) –
This is my go-to now for off road parts.
Jacob (verified owner) –
Just what I needed.