Your cart is currently empty!
Dobinsons Extended Jeep JL JT Front Sway Bar Link Kit | Gladiator JT Wrangler JL
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
$70.00
In StockDescription
Pair of front JL JT Front Sway Bar Link Kit | Jeep Gladiator | JL Wrangler – The JL JT Front Sway Bar Link Kit Fits Jeep Wrangler JL 2018+ 2 Door and 4Door models and Jeep Gladiator JT 2020+.
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- No need to be adjustable, already set to the correct length
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
Many people don’t realize that when lifting their vehicle, the sway bar angle because a lot steeper than normal, and this actually affects the wheel travel and ride comfort inside the vehicle. The sway bar links are literally stretched out and causing a type of binding on the rear sway bar not being able to do its job properly. By changing out the original swaybar links to the Gladiator front swaybar links by Dobinsons, you can set the angle back to a more neutral position, gaining wheel travel, gaining ride comfort, and also helping the swaybar to properly assist the vehicle in keeping it more level when cornering. These Gladiator front swaybar links should be used at any lift height of over 2″ so that you get the proper articulation from your new suspension kit, and are required with a lift height of 3″ or more. You’ll also notice that if you don’t have longer sway bar links installed, reinstalling the original links can be quite difficult as they’re very tight on a lifted Jeep.
Related products
-
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks Pair | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart -
Dobinsons
Dobinsons C59-327 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm free height, 18mm wire diameter, 271LBF/IN Spring Rate
$270.00 Select options -
Dobinsons
Dobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
$305.00 Select options -
Suspension
Dobinsons C59-302 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
$270.00 Select options