Montero NM NP NS NT 2000+

Showing all 10 results

Montero NM NP NS NT 2000+
Ships FREE !!
within 48 US States
Dobinsons IMS43-50783 Monotube IFP Front Struts for Mitsubishi Montero 2000+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 241mm from center of lower bushing to coil seat notch
- 473mm extended, 330mm compressed
- Instructions for setting coil seat height
$650.00 Add to cart
Montero NM NP NS NT 2000+
Dobinsons SC43-008 Pair of Strut Top Plates for Mitsubishi Montero 2000+
- Suits Mitsubishi Montero NM NP NS NT 2000+ Wagons
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- 2 Required per vehicle, sold as pairs
- Photo is for illustration purposes only
$120.00 Add to cart
Montero NM NP NS NT 2000+
Ships FREE !!
within 48 US States
Dobinsons IMS43-50784 Monotube IFP Rear Shocks for Mitsubishi Montero 2000+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
$650.00 Add to cart
Montero NM NP NS NT 2000+
Dobinsons IMS Lift Kit for Mitsubishi Montero NM NP NS NT 2000+ Wagons
- All selections are for the 2000+ US Spec V6 Gasoline 5-door Wagon models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- Japanese NOK Multi-Lip seals
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
From $1,975.00 Select options
Montero NM NP NS NT 2000+
Ships FREE !!
within 48 US States
Dobinsons MRA Lift Kit for Mitsubishi Montero NM NP NS NT 2000+ Wagons
- All selections are for the 2000+ US Spec V6 Gasoline 5-door Wagon models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Shock Design
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
From $3,105.00 Select options
Montero NM NP NS NT 2000+
Dobinsons C43-125 Rear 1.75″ Lift Coil Springs for Montero 2000-06
- 1.75-2.0″ rear lift with 110-220LBS constant weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$405.00 Add to cart
Montero NM NP NS NT 2000+
Dobinsons C43-126 Front 1.75″ Lift Coil Springs for Montero 2000-06 (Heavy Load)
- 1.75-2.0″ lift with 110-220LBS constant weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$270.00 Add to cart
Montero NM NP NS NT 2000+
Dobinsons C43-124 Front 1.75″ Lift Coil Springs for Montero 2000-06
- 1.75″ lift with stock weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$270.00 Add to cart
Montero NM NP NS NT 2000+
Ships FREE !!
within 48 US States
Dobinsons MRA 3-Way Adjustable Rear Shocks for Mitsubishi Montero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
$1,150.00 Add to cart
Montero NM NP NS NT 2000+
Ships FREE !!
within 48 US States
Dobinsons MRA 3-Way Adjustable Front Struts for Mitsubishi Montero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Photos for illustration purposes
$1,280.00 Add to cart