Your cart is currently empty!
JL Wrangler 2018-2024+
Showing 1–30 of 75 results
-
Full Suspension Kits - JL Wrangler (6)
-
Bumpers + Sliders - JL Wrangler (16)
-
Steering - JL Wrangler (11)
-
Wheels - JL Wrangler (8)
-
Shocks - JL Wrangler (5)
-
Coil Springs - JL Wrangler (6)
-
Performance Upgrades - JL Wrangler (23)
-
Fuel Tanks - JL Wrangler (1)
-
JL Wrangler 2018-2024+
Jeep Wrangler JL 4DR Long Range Auxiliary Fuel Tank (17gal) 2018+
- Suits Jeep Wrangler JL 4-Door Models from 2018 onwards with the 3.6L V6 Gas engine (will not fit 2-door models or Wranglers with the E-Torque option or Diesel engine, does NOT fit the 392 version)
- THIS IS A SPECIAL ORDER TANK THAT WOULD TAKE ABOUT 4-6 MONTHS TO ORDER FROM AUSTRALIA
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 21.5 gallon tank gives you a capacity of 38.5 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Fitting time – approximately 5 hours
- Usually stocked item in the US
- Part Number JWJLPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
$2,245.00 Select options -
Performance Upgrades - JL WranglerShips FREE !!
within 48 US StatesZ Automotive Jeep Gladiator JT Wrangler 392/4XE Front Camera
- Grille mounted camera for Jeep Gladiator JT and Wrangler JL 4XE and 392 (see regular JL Camera Kit)
- Attaches to the front grille neatly and discretely as shown in the photo
- Requires a Tazer JL or Tazer JL Mini to activate the “cargo camera” input on your screen
- Works on the 8.4 Uconnect only
- If the Tazer JL / Mini is present, this camera input can be activated at any time, in any drive mode, and at any speed, as long as you want
- It makes a perfect trail camera as well as for parking.
- This is a high-quality standard definition (480i) camera
- Download Instructions
$179.95 Add to cart -
AccessoriesShips FREE !!
within 48 US StatesZ Automotive Tazer JL Mini Programmer | Wrangler JL + Gladiator JT
- Fits All 2018-2023 Jeep Wrangler JL Models and 2018-2023 Jeep Gladiator JT Models
- Adjusts Your Jeep’s Performance After Modifications
- Features Can Be Accessed Using Dash Display, Using Steering Wheel Buttons to Navigate
- User-Friendly Design
- Two Categories of Features – Vehicle Settings and Live Functions (see full list below)
- Simple to Set Up
- Simple to adjust settings
- Covered by a 90-Day Warranty
- Some examples of features you can change:
- Adjust for gear ratio changes
- Adjust for tire size changes
- Enable/disable TPMS system if you’re running aftermarket wheels
- Enable backup camera when turn signals are activated
- Enable/disable Cargo Camera input (8.4 UConnect only)
- Optional front camera add-on for Jeep JL Wrangler and Gladiator/Wrangler 4XE/392 (Scroll down for specs)
- Installation Instructions and Manual Transmission Supplement
**Item is not returnable once opened. No electronic items sold at exitoffroad.com can be returned once opened.
$329.00 Add to cart -
Dobinsons
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
$50.00 Add to cart -
Dobinsons
Dobinsons Pair Front Poly Coil Seat Insulator For Jeep Gladiator & JL Wrangler
- Recommended to prevent bowing of coils when lifted (keeps the coils straight)
- Suits 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator JT
- High Quality Polyurethane , maintains height over time
- Perfect fit replacement OE isolator
- Sold as a pair
- Picture is for reference actual product may vary
$50.00 Add to cart -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
$146.00 Select options -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s HD Steering System | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- Over 45 Years of Building Steering and Suspension Components
- Massive 1.75″ x 5/16 wall DOM tubing for both the tie rod and the drag link
- Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
- Zinc plated tie rod ends for protection and long life
- Serrated Lock Washers
- The strongest JL/JT steering assembly you can buy
- Steering stabilizer tie rod clamp bracket included, option for either standard stabilizer or pass through style stabilizer
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a solid Aluminum version
Original price was: $798.00.$718.00Current price is: $718.00. Select options -
Steering DampersShips FREE !!
within 48 US StatesDobinsons Monotube JL Adjustable Steering Damper | Wrangler JL Gladiator JT
- Suits 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator JT
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Installation Instructions
$525.00 Add to cart -
Gladiator JT 2020-2024+
Jeep Wrangler JL & Gladiator Rubicon Rear Diff Cover by ARB
- Suits Jeep Gladiator JT and Wrangler JL 2-door and 4-door models with Dana 44 Rubicon Rear Axle
- ONLY FOR RUBICON MODELS
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
$187.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons 3-way Adjustable MRA Front Shocks | Wrangler JL, Gladiator JT (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 677mm extended, 425mm compressed
$1,350.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons 3-way Adjustable MRA Rear Shocks | Jeep Wrangler JL (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 732mm extended, 460mm compressed
$1,350.00 Add to cart -
AccessoriesShips FREE !!
within 48 US StatesCompressor Mount & Connection Kit – Jeep JL & JT Skid Plate for ARB Dual Air Compressor
- Jeep® JL and JT ARB® Skid Plate Mounting Install Kit.
- For Automatic Transmission Only.
- INCLUDES:
- Extra Thick Heavy Duty Mounting Bracket
- Mounting Hardware
- Powder Coated Black
- 2 x 90° ⅜” Swivel Push-to-Connect Fitting
- 48” Hi Temp/Hi Pressure Air Line Hose
$149.99 Read more -
AccessoriesShips FREE !!
within 48 US States4 Tire Inflation System – Jeep JL Engine Mount With Box Fittings Hoses & Storage Bag – Black
- For Jeep Wrangler and Unlimited JL & JLU engine bay
- Air It Up 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
- Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
- ADS Controller features 2 inlet valves with permanent or portable air source.
- Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
- Includes 8 Quick Connect Chucks with the easy to use Betty Bar feature and 4 Green Tire Connect Whips with a Storage Bag
- Heavy Duty Construction with DOT approved hoses and fittings.
- Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
- Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, and Rear Cargo Area Mounting Solutions.
- 5-Year Limited Month Warranty
Original price was: $299.99.$249.99Current price is: $249.99. Add to cart -
Bags and BoxesShips FREE !!
within 48 US StatesOVS Extra Large Trash Bag Tire Mount – #16 Waxed Canvas
- Extra Large Tire Mount
- Waxed Canvas Duck 16 Lb Cotton
- Eco Friendly Breathable Material
- Infused with Paraffin – Waterproof
- Double Reinforced Stitching
- Heavy Duty Reinforced 10 Lb Zippers
- Over-sized Heavy-Duty Buckles
- Mounted To Spare Tire or Tailgate
- Exterior Storage Mesh Pouches
- Interior Synch To Secure Debris
- Heavy Duty Ballistic Nylon Straps
$89.99 Add to cart -
Dobinsons
Dobinsons JL JT Adjustable Front Lower Arms | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- More details and installation instructions are down below
$405.00 Add to cart -
JL Wrangler 2018-2024+Ships FREE !!
within 48 US StatesDobinsons IMS29-60737 Rear 2.6″ IMS Shocks for Jeep JL Wrangler
- Fits Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 732mm extended, 460mm compressed
$650.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS29-60736 Front 2.6″ IMS Shocks for Jeep Gladiator and JL Wrangler
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 682mm extended, 425mm compressed
$650.00 Add to cart -
Bumpers + Sliders - JL WranglerShips FREE !!
within 48 US StatesRusty’s JL Tire Carrier | Jeep Wrangler JL 2018+
- Fits: 2018-2024+ Jeep Wrangler JL
- Made of 3/16-inch and 1/4-inch steel
- 1/2-inch hinge on “Oilite” oil embedded bronze bearings
- Has a Reinforcement Plate inside the body to strengthen the hinge mounting area
- 100% bolt-on installation
- Will carry up to a 42-inch tire
- One-hand operation
- Adjustable tire position works with most aftermarket bumpers and wheel offsets
- Three different lug patterns available
- E-coated and Powder Coated Satin Black
- Optional bolt-on Hi-Lift Jack Mount available
- Optional license plate relocation bracket option is below
- Optional R35 Recon Package steel Camera Enclosure Available
- Installation Instructions
- Built in Rainbow City, Alabama, USA
$895.00 Select options -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s Front Track Bar Mount Brace | JK Wrangler
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
$146.00 Add to cart -
Rusty's Off RoadShips FREE !!
within 48 US StatesRusty’s Adjustable JL Rear Track Bar | Jeep JL Wrangler
- Fits: 2018-Current Jeep JL Wrangler Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings at both ends
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
$215.00 Add to cart -
Rusty's Off RoadShips FREE !!
within 48 US StatesRusty’s Adjustable Front Track Bar | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings on one end and a heim on the other
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
$215.00 Add to cart -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s HD Drag Link Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A drag link is the part that connects from the Pitman Arm of the Steering Box down to the Knuckle of the wheel
- Massive 1.75″ x 0.250-wall DOM tubing Drag Link bar
- Adjustable forged ends are threaded for adjustment without removing the drag link from the vehicle
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Drag Link you can buy
- Complete replacement assembly, no other parts needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also offered in a aluminum version
Original price was: $459.00.$413.00Current price is: $413.00. Add to cart -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s HD Aluminum Drag Link Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A drag link is the part that connects from the Pitman Arm of the Steering Box down to the Knuckle of the wheel
- Massive 1.825″ 7075 SOLID Aluminum Drag Link
- Adjustable forged ends are threaded for adjustment without removing the drag link from the vehicle
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- Polished to a “like Chrome finish”
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Drag Link you can buy
- Complete replacement assembly, no other parts needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also available in a steel DOM version
Original price was: $502.00.$452.00Current price is: $452.00. Add to cart -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
- Massive 1.825″ 7075 SOLID Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Tie Rod you can buy
- Complete assembly from one side to the other, nothing else needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
Original price was: $502.00.$452.00Current price is: $452.00. Select options