45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)

Showing all 16 results

40 Series Land Cruiser Late (1980-1984)
Dobinsons Greasable Land Cruiser Shackles for Front or Rear 40 60 70 Series
- Pair of left and right greasable shackles to suit a range of Toyota Land Cruiser models (See list below)
- Recessed twin hole greasable design, anti-reverse built in to stop the leaf spring from bending backwards
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles. Side-specific, includes one left and one right (2 shackles)
- Incredibly tough and durable gold zinc plating
$130.00 Add to cart
60 62 Series Land Cruiser (1980-1989)
Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota
- Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
$100.00 Add to cart
Dobinsons
Dobinsons Greasable Pin Kit (Pair) for Toyota Land Cruiser 40 60 70 Series Models (SP59-007)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- See list of suitable vehicles down below
$80.00 Add to cart
Dobinsons
Dobinsons UB59-453-3K U-Bolt Set (1 Pair)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 2 U-bolts, enough for 1 leaf spring
- Requires 2″ lift leaf springs to ensure proper fitment
- See below for vehicle fitment list
- Photo for illustration purposes only. These u-bolts are round at the top
- SOLD in pairs because some Toyotas need 3 per vehicle, some need 2
$45.00 Add to cart
Suspension
Dobinsons GS59-649 Rear Twin Tube Shocks – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
  
  See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
$310.00 Add to cart
Dobinsons
Dobinsons UB59-453-1K U-Bolt Kit (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle (2 pairs)
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for Illustration purposes only. These u-bolts are round at the top
$90.00 Add to cart
Dobinsons
Ships FREE !!
within 48 US States
Dobinsons IMS59-50649 Monotube IFP Rear Shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
$580.00 Add to cart
Replacement Bushings
Dobinsons Lower Shock Bushings (2 Halves) for -682 -687 -685 -649 -651 -637
- Dobinsons replacement rear lower shock bushing – 2 half bushings for 1 shock
- Suits a variety of Dobinsons shocks, part numbers ending in -682 -687 -685 -649 -651 -637
- Full list of part numbers this fits is below
- This is for a single bushing set only for 1 shock
- 2 half bushings, they go in from either side of the lower eyelet to form a complete bushing
- High quality natural rubber bushing
$20.00 Add to cart
Dobinsons
Dobinsons SD59-823 Big Bore Steering Damper | Land Cruiser 40 45 55 series
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- Suits Toyota Landcruiser 40, 45 and 55 series (all years and variants of these models)
$135.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A649 3-Way Adjustable Rear Shocks for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,150.00 Add to cart
40 Series Land Cruiser Late (1980-1984)
Ships FREE !!
within 48 US States
Dobinsons IMS59-50635 Monotube IFP Shocks FJ40 BJ40 FJ45
- Suits the front end of all FJ40 Land Cruisers and all FJ45 front ends (25mm and 35mm spring eyes)
- Suits the rear end of early model FJ40’s up to 01/1975
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart
Suspension
Dobinsons GS59-651 Rear Twin Tube Shocks
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
  
  See list of suitable vehicles down below
- 591mm extended, 363mm compressed
- 60mm diameter outer tube size
$310.00 Add to cart
Suspension
Dobinsons GS59-635 Twin Tube Shocks
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See full vehicle list below for fitment
- 488mm extended, 308mm compressed
- 50mm diameter tube
$310.00 Add to cart
Sale!
New Item
Roof Racks
RCI is on Sale For Spring!!
RCI Low-Pro Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
Original price was: $375.00.Current price is: $337.50. Select options
Differential | Drivetrain
Ultimate Toyota Knuckle Rebuild Kit
- Suits TOYOTA PICKUP (1979-1985), TOYOTA 4RUNNER (1985), TOYOTA LAND CRUISER FJ40 (1979-1983), TOYOTA LAND CRUISER FJ50 (1979-1980), TOYOTA LAND CRUISER FJ60 (1980-1990), TOYOTA LAND CRUISER FJ70 – Models with 4-stud knuckles only (1984-CURRENT)
- The Ultimate Toyota Knuckle Rebuild Kit includes gaskets, upgraded seals, high-quality bearings and more. We’ve even included the specialty tools needed to complete the job. Simply put, this is the best, most complete knuckle rebuild kit available!
- Includes:
  
  (1) 54mm Spindle Socket
  
  (1) Knuckle Pull Scale
  
  (1) Upgraded HD Inner Axle Seals
  
  (2) Koyo* Front Wheel Bearing Kits (Includes 2 Inner and 2 Outer Bearings and 2 Spindle Seals)
  
  (1) Trail-Safe Wiper Seals with Rock Rings and Extended Hardware
  
  (2) Brass Spindle Bushings
  
  (2) Wheel Bearing Nut Kits
  
  (1) Spindle Stud Kit
  
  (4) Koyo** Trunnion Bearings
  
  (1) Trunnion Bearing Shim Pack
  
  (2) Inner Steel Rings that go behind the Wiper Seals
  
  (2) Inner Spindle Gaskets
  
  (2) Outer Spindle Gaskets
  
  (2) Hub Inner Gaskets
  
  (2) Hub Outer Gaskets
  
  (2) Hub Dial O-Rings for Aisin Hubs
  
  (1) Toyota Ultimate Backing Plate Eliminator Kit
  
  * Some kits may contain Timken bearing kits when Koyo bearings are not available.
  
  ** Some kits may contain Schaeffler/FAG trunnion bearings when Koyo bearings are not available.
- Does not fit FJ80 Land Cruiser front axles
$460.00 Add to cart
40 Series Land Cruiser Late (1980-1984)
Dobinsons HJ47-7L-F Front Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45mm with 300LBS+ constant front end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
$430.00 Add to cart