Sequoia 2nd Gen (2008-2022)

Showing 1–30 of 46 results

Full Suspension Kits - Sequoia 2nd Gen (8)
Performance Upgrades - Sequoia 2nd Gen (13)
Skid Plates - Sequoia 2nd Gen (3)
Control Arms - Sequoia 2nd Gen (8)
Timbren
Ships FREE !!
within 48 US States
Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
$269.36 Add to cart
Tundra 2nd Gen (2007-2021)
Dobinsons GS59-710 Pair Ext Travel Struts for Sequoia 08-22 + Tundra 07-21
- Suits 2008-2022 Toyota Sequoia and 2007-2021 Toyota Tundra
- These are extended travel. They have a “droop spacer” that should be removed for low lift heights so that the coil stays captured
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-710 Specifications: 615mm extended, 445mm compressed lengths, 54mm body size
- Sold in pairs
$350.00 Add to cart
Bump Stops
Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-current Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022+ Tundra, 2008-2024 Sequoia
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
$161.00 Add to cart
200 Series Land Cruiser (2008-2021)
Dobinsons DD59-530K Front IFS Diff Drop Kit | Tundra 200 Series Sequoia
- Suits Landcruiser 200 Series 2008-21, 2008-22 Sequoia and 2008-2021 Tundra
- Keeps CV angles at a good working angle when lifted
- Allows for lifts over 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Instructions
$90.00 Add to cart
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
  
  Toyota Land Cruiser 200 Series – all years
  
  Toyota 300 Series Land Cruiser
  
  Lexus LX570 – all years
  
  Toyota Tundra – 2007 to 2021
  
  Toyota Tundra 2022+
  
  Toyota Sequoia – 2008 to 2022
  
  Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
$55.00 Add to cart
On Backorder
Suspension
Dobinsons GS59-713 Pair of Rear Shocks | Toyota Sequoia 2008-2022
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
- Dobinsons GS59-713 Specifications: 471mm extended, 315mm compressed
- Add this kit when buying these shocks if you will be using these for 2.5″of lift
$310.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS59-60710 IFP Front Struts for Toyota Tundra and Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
$720.00 Add to cart
Sequoia 2nd Gen (2008-2022)
Dobinsons C59-719V Sequoia 2.5″ Lift Rear Variable Rate Coils for 2008-2022
- Gives 2.5″ rear lift and an excellent ride on a 2nd Gen Sequoia 2008-2022 5.7L V8
- These coils are made SPECIFICALLY for a 2nd Gen Toyota Sequoia with IRS (Independent Rear Suspension)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 480-600lbs/in. – Variable Rate
- 440mm Free Height – Variable Rate Coils
- Longer shocks required. Use Dobinsons GS59-713 with these shock extensions
$405.00 Add to cart
Dobinsons
Dobinsons Toyota Sequoia Rear Shock Extension Kit | 2008-2022
- Suits 2008-2022 Toyota Sequoia
- Allows you to use either the Dobinsons GS59-713 twin tube rear shocks with a 2.5″ rear coil spring set.
- These shocks aren’t quite long enough to handle the added length that a 2.5″ lift needs, and yes with this simple bolt-on bracket, this avoids the need for Dobinsons to make longer shocks
- The IMS59-60713 are already longer and do not require shock extensions
- The kit comes with the 2 brackets as pictured and new nuts and bolts to attach them in place. They simply sit between the shock mount and the control arm to raise the shock into the proper position.
- These SHOULD NOT be used for a 1.75″ lift, as the shocks will then bottom out too soon.
- Could be used with other brands of shocks, but were made to compliment the complete Dobinsons 2.5″ Suspension kit for the 2008-2022 Toyota Sequoia
$60.00 Add to cart
Sequoia 2nd Gen (2008-2022)
Dobinsons C59-477 1.75″ Rear Coils for Toyota Sequoia 2008-2022 5.7L V8
- C59-477 are made specifically for the 2008 to 2022 Toyota Sequoia with the 5.7L V8 to give 1.75″ (45mm) of rear lift
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 624LBF/in spring rate
- Sold in Pairs
$405.00 Add to cart
Bump Stops
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
$170.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS59-60713 IFP Rear Shocks for Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
$650.00 Add to cart
Sequoia 2nd Gen (2008-2022)
Dobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)
- Suits 2008-2022 Toyota Sequoia 4×4 V8 models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
- Does not suit rear air suspension equipped models
- 2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
- Front IMS struts assembly instructions
From $1,470.00 Select options
Sale!
Tundra 2nd Gen (2007-2021)
RCI is on Sale For Spring!!
RCI Full Skid Plate Set | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front, transmission/transfer-case skid plates
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
Original price was: $705.00.Current price is: $634.50. Select options
Coil Springs
Dobinsons C59-476 1.75″ Front Coils for Toyota Sequoia 2008-2022 5.7L V8
- Dobinsons C59-476 Front 45mm Lift Coils, sold as a pair – suits Toyota Sequoia 2008 to 2022 5.7L V8 models
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 367mm free height, 19mm wire, 685LBF/in rate
- Sold in Pairs
$405.00 Add to cart
SPC
Ships FREE !!
within 48 US States
SPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
$749.95 Add to cart
Coil Springs
Dobinsons C59-720 2.5″ Front Coils for Toyota Sequoia 2008-2022 5.7L V8
- Suits Toyota Sequoia 2008-2022 5.7L V8 4×4 models
- Does not suit factory air suspension models
- C59-720 Front 2.5″ Lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$405.00 Add to cart
Dirt King Fabrication
Dirt King Toyota UCA Ball Joint Caps
These ball joint caps seal the Dirt King ball joint cups from the elements. The caps are machined from 6061 aluminum, have an anodized finish, and utilize o-rings for a snug press fit. Price includes two caps with your choice of red or black.

Compatibility :
2005-2023 Tacoma Ball Joint UCAs
2003-2024 4Runner Ball Joint UCAs
2007-2016 FJ Cruiser Ball Joint UCAs
2007-2021 Tundra Ball Joint UCAs
- Can only be used if you’ve purchased Dirt King ball joint UCA’s!!
$59.00 Select options
Sequoia 2nd Gen (2008-2022)
Dobinsons Stock Height Rear Coils for Toyota Sequoia 2008-2022 5.7L V8
- C59-475 are made specifically for the 2008 to 2022 Toyota Sequoia as new stock height replacement coils
- These will replace your worn out factory coils and bring it back to the original factory height
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 624LBF/in spring rate
- Sold in Pairs
- Can be used with stock rear shocks or Dobinsons GS59-713 or IMS59-60713
$405.00 Add to cart
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
$120.00 Add to cart
Sequoia 2nd Gen (2008-2022)
Ships FREE !!
within 48 US States
Dobinsons IMS Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8
- Fully rebuildable and re-valvable monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Dobinsons IMS rear shocks are longer than the twin tubes, 343mm compressed length, 489mm extended length
- Front IMS struts assembly instructions
From $2,180.00 Select options
Firestone
Firestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia
- Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles
- Works with 0-1.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
$144.12 Add to cart
Dirt King Fabrication
Dirt King Toyota Tundra Tubular Ball Joint UCA’s – Tundra Sequoia
- Suits 2007-2021 model Toyota Tundra 2nd Gens, and 2008-2022 Sequoia 2nd Gens
- Proudly made in the USA
- CAD designed, Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Grease fitting ports for easy servicing, Zinc plated components for corrosion resistance
- Professionally MIG welded, powder coated black
$599.00 Select options
All Pro Offroad
Ships FREE !!
within 48 US States
All Pro Complete CV Boot Kit | Tundra 07-21 + Sequoia 08-22 + 200 Series 08-21
- Complete CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, and Toyota Land Cruiser 200 Series 2008-2021
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$120.00 Add to cart
Sale!
Tundra 2nd Gen (2007-2021)
RCI is on Sale For Spring!!
RCI Engine Skid Plate | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front engine skid plate only
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
Original price was: $349.00.Current price is: $314.10. Select options
Tundra 2nd Gen (2007-2021)
Ships FREE !!
within 48 US States
Dirt King Toyota Tundra Boxed UCA set with Uniballs – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- Proudly made in the USA
- CAD designed, Boxed plate construction, Professionally MIG welded
- 4130 chromoly uniball cups, 1” FK uniballs, 17-4 stainless steel misalignment spacers
- Military grade F911 hardware, Brushed stainless steel logo plates
- Preassembled for fast installation
- Grease fitting ports for easy servicing of bushings
- Zinc plated components for corrosion resistance
$849.00 Add to cart
Upper Control Arms
Ships FREE !!
within 48 US States
Dobinsons Billet Aluminum UCA’s | 07-21 Tundra and 08-22 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
$1,195.00 Add to cart
Full Suspension Kits - Sequoia 2nd Gen
Ships FREE !!
within 48 US States
Dobinsons 2.0-3.0″ Pre-Assembled MRA Coilovers for Toyota Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Front coilover assembly instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
$2,185.00 Select options
Full Suspension Kits - Sequoia 2nd Gen
Dobinsons 1.75-3.0″ Pre-Assembled IMS Coilovers for Toyota Sequoia 08-22
- Suits Toyota Sequoia 2008-2022 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the requested clip height in the drop box
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment, does require lower mount clearancing
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Sequoia IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
$1,370.00 Select options
Coil Springs
Dobinsons C59-474 Stock Height Front Coils for Toyota Sequoia 2008-2022 5.7L V8
- Dobinsons C59-474 Front Stock Height Coils, sold as a pair – suits Toyota Sequoia 2008 to 2022 5.7L V8 models
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Works with stock struts, or Dobinsons GS59-710
- The aluminum droop spacer on the GS59-710 must be removed if using these coils on those struts, so that the coil stays captured in the mount
$405.00 Add to cart