Your cart is currently empty!
300 Series Land Cruiser (2021+)
Showing all 12 results
-
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
$55.00 Add to cart -
Bump Stops
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
$170.00 Add to cart -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 22+ Sequoia 23+
- Made specifically for the 4×4 Toyota Tundra from 2022-2024 and Toyota Sequoia from 2023+ and 2022+ Land Cruiser 300 Series
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Assembly Instructions
$120.00 Add to cart -
Dobinsons
Dobinsons 15mm Rear Spacer | 2022+ Tundra Sequoia LC300
- Suits 2022-2024+ Toyota Tundra, 2023-2024+ Toyota Sequoia, 2022+ Toyota Land Cruiser 300 Series
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring, below the OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of rear lift
- Photo for illustration purposes
- There’s also a front spacer option
$40.00 Add to cart -
Sequoia 3rd Gen (2023-2024+)Ships FREE !!
within 48 US StatesDobinsons IMS59-60441 IFP Rear Shocks | Sequoia & LC300
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
Sequoia 3rd Gen (2023-2024+)Ships FREE !!
within 48 US StatesDobinsons MRA59-A441 3-Way Adjustable Rear Shocks
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
200 Series Land Cruiser (2008-2021)Ships FREE !!
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | 200 + 300 Series Land Cruiser
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
$940.00 Add to cart -
Bump StopsShips FREE !!
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
From $1,090.00 Select options -
Bump Stops
Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
$400.00 Add to cart -
300 Series Land Cruiser (2021+)Ships FREE !!
within 48 US StatesDobinsons IMS59-60440 IFP Front Struts | Land Cruiser 300 Series
- Suits Toyota Land Cruiser 300 Series 2021+ (not sold in the USA)
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
$720.00 Add to cart -
Sequoia 3rd Gen (2023-2024+)
Dobinsons GS59-441 Pair of Rear Shocks | Sequoia & LC300
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
$310.00 Add to cart