Your cart is currently empty!
Frontier D40
Showing 1–30 of 31 results
-
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
Bump Stops
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
$170.00 Add to cart -
Dobinsons
Dobinsons SC45-004 Pair of Strut Top Plates for Nissan Frontier Pathfinder Xterra
- Suits Nissan Frontier D40 and D41 and Navara D40, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- 2 Required per vehicle, sold as pairs
- Photo is for illustration purposes only
- Assembly instructions
$120.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS45-50648 Extended Travel IMS Struts | Nissan Frontier Xterra R51 Pathfinder (2-3″)
- IMS front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Length specs – 278mm compressed and 410mm extended
- Standard coil seat height setting is 106mm, or set to 119mm for an extra 1″ of lift
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
Suspension
Dobinsons C45-254 Front Lifted Coil Springs for Nissan Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 541LBF/in spring rate
- C45-254 – 1.6″ – Nissan Pathfinder R51 with up to 110LBS constant weight
- C45-254 – 1.6″ – Nissan Xterra (2005-2015) with 110-220LBS constant weight
- C45-254 – 1.6″ – Nissan Frontier D40 with 110-220LBS constant weight
- C45-254 – Nissan D41 Frontier 2022+ models, 3.0″ with stock weight, 2.5″ with 110lbs constant weight
$270.00 Select options -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSOSR Active Off Road Rear Bump Stops | Frontier Tacoma Tundra
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2005-2023 Tacoma (using standard u-bolts), 2000-2021 Toyota Tundra, 2005-2023 Nissan Frontier
- Click here for instructions
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90P00 (1/2″ spacer)
- A25723-90AH00 (1″ spacer)
$269.36 Add to cart -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
$165.00 Add to cart -
Dobinsons
Dobinsons PB45-1095K Rear Polyurethane Leaf Spring Bush Kit
- Suits Nissan Frontier D40 All Years, Nissan Frontier D41 2022+, Nissan Xterra (2005-2015), Nissan Navara D40 All Years
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
$90.00 Add to cart -
SPC
SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)
- Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
- These cams are designed to install in the lower control arms for camber and caster adjustment
- They replace the original non-adjustable lower control arm bolts
- Front Adjustment range: Camber/Caster ±2.00°
- Installation time: .3 hr/side
- The purchase includes 2 pairs, enough for 1 vehicle
- Installation Guide
$90.00 Add to cart -
Suspension
Dobinsons Rear U-Bolts – UB59-667K (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for illustration purposes only. These are square at the top
- For Nissan Frontier D41 2022+ models, these UB59-667K suit the L59-002-R leaf springs only. The heavier rated springs need the UB59-453-2K U-bolts.
$90.00 Add to cart -
Suspension
Dobinsons C45-256 Front Lifted Coil Springs for Nissan Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm free height, 541LBF/in spring rate
- C45-256 – 1.6″ – Nissan Xterra (2005-2015) with stock front end weight
- C45-256 – 1.6″ – Nissan Frontier D40 with up to 110LBS constant weight
- C45-256 – Nissan D41 2022+ models, 2.5″ with stock weight, 2″ with 110lbs constant weight
$270.00 Select options -
Suspension
Dobinsons SK45-054 Greasable Shackle Kit for Nissan D40 D41Frontier Xterra
- Suits Nissan Frontier D40 and D41 and Nissan Xterra (2005-2015)
- 90 degree greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is of exact product.
- Also available with 1″ of lift
$110.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum UCA’s | Nissan Frontier Xterra Pathfinder
- Super strong billet aluminum front upper control arms (UCA’s) for Nissan D40 and D41 platforms
- Suits 2005-2021 Nissan Frontier, 2022-Present Nissan Frontier, 2005-2015 Nissan Xterra, 2005-2012 Nissan Pathfinder R51
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Includes detailed instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons 3-Way Adjustable Extended Travel Struts | Nissan Xterra Frontier Pathfinder R51
- MRA Extended Travel front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra 05-15, Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Length specs – 278mm compressed and 410mm extended
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
$1,280.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS45-50645 Rear IMS Shocks | Frontier D40 & Xterra
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS45-50642 Front IMS Struts | Frontier Xterra R51 Pathfinder (0-2.5″)
- IMS front struts for 0-2.5″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specs: 385mm extended, 266mm compressed
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
SPCShips FREE !!
within 48 US StatesSPC 25540 | UCA’s for Nissan Frontier Navara Xterra Pathfinder
- Suits Nissan Frontier 2005-2021, Nissan Frontier 2022+, Nissan Navara 2005-2020. Nissan NP300 2016+, Nissan Xterra (2005-2015), Nissan Pathfinder R51 2005 to 2012
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- Arm will get you -1.0° to +3.00° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
$695.95 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons MRA45-A645 3-Way Adj Rear Shocks Xterra Frontier
- Suits 2005-2015 Nissan Xterra, 2005-2021 Nissan D40 Frontier and Navara with up to 2.0″ of lift
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 565mm extended, 361mm compressed
- Sold in Pairs
$1,150.00 Add to cart -
Dobinsons
Dobinsons GS45-642 Front Struts for Nissan Xterra D40 Frontier R51 Pathfinder
- Suits Nissan Xterra (2005-2015), D40 Frontier and Navara, D23 Navara and R51 Pathfinder
- Suitable for stock height up to 2.0″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
$350.00 Add to cart -
Dobinsons
Dobinsons GS45-645 Rear Shocks for Nissan Xterra, D40 Frontier Navara
- Suits Nissan Xterra (2005-2015), D40 Frontier and Navara
- Suitable for stock height up to 2.0″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
$310.00 Add to cart -
Suspension
Dobinsons 1″ Lift Greasable Shackle Kit for Nissan D40 D41 Frontier Xterra 05+
- Suits Nissan Frontier D40 and D41 and Nissan Xterra (2005-2015)
- 2″ longer than stock that add approximately 1″ of lift
- Greasable design – requires greasable bushings to be greasable
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is for illustration purposes
- Also available in regular length, without lift
$210.00 Add to cart -
Frontier D40Ships FREE !!
within 48 US StatesDobinsons 2.5″ Lift MRA Extended Travel Coilovers – Nissan Frontier 05-21
- Extended Travel Coilovers Suit Nissan Frontier D40 4×4 Models 2005-2021 – lifts 2.5″
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
From $1,795.00 Select options -
Bump StopsShips FREE !!
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
From $1,090.00 Select options -
Bump Stops
Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
$400.00 Add to cart