Your cart is currently empty!
Dobinsons
Showing 1–30 of 935 results
-
4Runner 4th Gen (2003-2009)Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
$120.00 Add to cart -
SuspensionDobinsons C59-302 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
$270.00 Select options -
4Runner 4th Gen (2003-2009)Ships FREE !!
within 48 US StatesETA is Summer 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
Lexus
Dobinsons C59-314 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 405/405mm free height, 17mm wire thickness, 586LBF/IN rate
$270.00 Select options -
4Runner 4th Gen (2003-2009)
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
$75.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits various vehicles, as listed below
- High Quality Polyurethane, maintains height over time
- Fits on top of OE isolator, below the frame mount
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of lift
$40.00 Add to cart -
4Runner 3rd Gen (1996-2002)
Dobinsons PS59-4030 1/2″ Lift Alloy Strut Top Mount Spacer | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits various vehicles, as listed below
- Dobinsons PS59-4030 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Fits between the strut top mount and the chassis of the vehicle
- Note: See 2nd photo to make sure you have enough threads left to install the spacer. This vehicle came with short studs that don’t allow the spacer to be installed without changing out to thicker studs
$55.00 Add to cart -
Bushings
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
$105.00 Add to cart -
4Runner 4th Gen (2003-2009)
Dobinsons C59-505 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 405mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
- Add a PS59-4025 trim spacer if used with KDSS
$270.00 Select options -
4Runner 4th Gen (2003-2009)
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
$200.00 Add to cart -
4Runner 4th Gen (2003-2009)Ships FREE !!
within 48 US StatesETA is mid-May 2024Dobinsons IMS59-50701 IMS Shocks | Toyota and Lexus (0-3″ lift)
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Specifications: 598mm extended, 389mm compressed
$580.00 Add to cart -
4Runner 4th Gen (2003-2009)
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
$270.00 Select options -
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Suspension
Dobinsons GS59-705 Rear Shocks | FJ Cruiser 4Runner GX470 GX460
- Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-705 Specifications: 590mm extended, 355mm compressed, 50mm body size
- Made in Yellow and Black
$310.00 Select options -
4Runner 4th Gen (2003-2009)
Dobinsons C59-327 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm free height, 18mm wire diameter, 271LBF/IN Spring Rate
$270.00 Select options -
4Runner 5th Gen (2010-2024)
Dobinsons 4Runner IMS Suspension Kit for 2010-24 (1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, with or without KDSS
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Fully rebuildable and re-valvable shocks and struts
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- Base Kit Includes 2 Front IMS Monotube Struts, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Suspension Installation Video
From $1,770.00 Select options -
4Runner 5th Gen (2010-2024)Ships FREE !!
within 48 US StatesETA is mid-May 2024Dobinsons IMS59-50700 Front IMS Struts | 2010+ 4Runner FJ Cruiser GX460 (0-2.5″ Lift)
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 560mm extended, 420mm compressed
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
$650.00 Add to cart -
4Runner 4th Gen (2003-2009)Ships FREE !!
within 48 US StatesETA is mid-May 2024Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
Suspension
Dobinsons C59-599 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 390mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
$270.00 Select options -
4Runner 4th Gen (2003-2009)
Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
$270.00 Select options -
Suspension
Dobinsons C59-352 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 18mm wire diameter, 730LB/IN Spring Rate
$270.00 Select options -
4Runner 4th Gen (2003-2009)
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
$350.00 Select options -
Suspension
Dobinsons Lift Kit for Toyota 4Runner 4×4 2003-2009 (All Options 0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- You can choose from Dobinsons Classic Twin Tube Shocks, IMS Monotube, or MRA remote resi shocks with 3-way valving adjustment
From $930.00 Select options -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-700 Front Struts | FJ Cruiser 4Runner GX460 2010-2024
- Dobinsons GS59-700 front struts for 2010-2016 Toyota FJ Cruiser, 2010-2024 Toyota 4Runner, Lexus GX460, and Prado 150 – twin tube design
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-700 Specifications: 555mm extended, 432mm compressed, 50mm body size
$350.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons Build-A-Kit Toyota 4Runner 2010-24 (All Options 1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 Models 2010-2024, with or without KDSS
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Dobinsons Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel, linear rate
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Learn more about the 3 different shock types on this blog post
- Suspension Installation Video
- All Dobinsons parts have a full 2 year warranty
From $1,200.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
$135.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks | Toyota 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Available in Yellow or Black
$310.00 Select options
