Your cart is currently empty!
Dobinsons Adjustable Rear Upper Trailing Arms Pair | Land Cruiser 100 Series
- Suits Toyota Land Cruiser 100 Series (1998-2007) and Lexus LX470 (1998-2007)
- Fully adjustable to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
- We also offer matching Rear Lower Control Arms
$345.00
In Stock
SKU: WA59-555K
Categories: 100 Series Land Cruiser IFS (1998-2007), Control Arms, Control Arms - 100 Series, Dobinsons, LX470, Suspension, Upper Control Arms
Brand: Dobinsons Spring & Suspension
Description
Dobinsons WA59-555K are adjustable rear upper control arms for Toyota Land Cruiser 100 Series and Lexus LX470, to be used on any vehicle lifted or not, up to 4″ of lift. This Dobinsons WA59-555K kit comes with both upper arms and has the pre-installed rubber bushings. The rubber bushings allow for more flex of the rear axle, and will also be noise and maintenance free. These adjustable arms will allow you to properly set your rear pinion angle due to adding a lift, while also adding strength over the stock arms. Suitable also for long travel rear suspension setups.
Instructions for Dobinsons WA59-555K use: The shorter end goes towards the frame, with the long end towards the axle. Set initial length to the same as factory arms, and install them loosely, then measure your pinion angle, and adjust the arm length until it is set properly. Adding too much length could lead to driveline vibrations.
Suits all these vehicles:
100 Series Land Cruiser
Lexus LX470
Dobinsons Spring & Suspension™ established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service.
Dobinsons Spring & Suspension™ pride themselves on having the world’s largest range of 4×4 spring and suspension componentry. This extensive range can be viewed using their online catalogues or selecting online.
Their quality of design and manufacture is what sets Dobinsons apart from their competitors, if not the price. The company manufactures and repairs a large range of springs and sells a comprehensive range of suspension components.
They have over 13,000 spring specifications on hand and computerized spring design programs providing them with professional and accurate results. For the past 25 years,
Dobinsons Spring & Suspension™ have been exporting their products to different parts of the world and their name has become synonymous with quality in these countries. The factory covers over 4000m², consisting of a leaf spring production line, a coil spring production line and two large stock holding warehouses. There are thousands of parts kept in stock, including Coil Springs, Leaf Springs, Torsion Bars, Shock Absorbers, Greasable Shackle Kits and Pins, U-Bolts, Polyurethane Bushes, Centre Bolts, Castor Wedges & 4×4 Accessories. It also includes a fully equipped service department dedicated to removing and replacing all types of suspension componentry on passenger vehicles, 4×4 vehicles and trucks.
Vehicle Fitment:
1998 Toyota Land Cruiser Upper Control Arms
1999 Toyota Land Cruiser Upper Control Arms
2000 Toyota Land Cruiser Upper Control Arms
2001 Toyota Land Cruiser Upper Control Arms
2002 Toyota Land Cruiser Upper Control Arms
2003 Toyota Land Cruiser Upper Control Arms
2004 Toyota Land Cruiser Upper Control Arms
2005 Toyota Land Cruiser Upper Control Arms
2006 Toyota Land Cruiser Upper Control Arms
2007 Toyota Land Cruiser Upper Control Arms
1998 Toyota Lexus LX470 Upper Control Arms
1999 Toyota Lexus LX470 Upper Control Arms
2000 Toyota Lexus LX470 Upper Control Arms
2001 Toyota Lexus LX470 Upper Control Arms
2002 Toyota Lexus LX470 Upper Control Arms
2003 Toyota Lexus LX470 Upper Control Arms
2004 Toyota Lexus LX470 Upper Control Arms
2005 Toyota Lexus LX470 Upper Control Arms
2006 Toyota Lexus LX470 Upper Control Arms
2007 Toyota Lexus LX470 Upper Control Arms
4 reviews for Dobinsons Adjustable Rear Upper Trailing Arms Pair | Land Cruiser 100 Series
You must be logged in to post a review.
You may also like…
-
Dobinsons
Dobinsons Adjustable Rear Lower Control Arms Pair | Land Cruiser 100 Series
- Suits all 100 Series Land Cruisers from 1998-2007 and also the Lexus LX470 1998-2007
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
- We also offer matching Rear Upper Control Arms
(4 reviews)
Related products
-
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews)
Andrew (verified owner) –
*****
Justin (verified owner) –
Very good customer service, super friendly.
Benjamin (verified owner) –
Great description on the page, easy to understand what I was buying.
Daniel (verified owner) –
I received it really fast.