Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons IMS59-60440 2.6″ IFP Front Struts Pair | LC250 LC300
- Suits Toyota Land Cruiser 300 Series 2021+ (not sold in the USA), and is an Extended Travel Option for 2024+ Toyota Land Cruiser 250 Series for 2-3″ of lift
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- 624mm extended, 453mm compressed
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Note: If installed on a Toyota Land Cruiser 250 Series, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
$720.00
In Stock
SKU: IMS59-60440
Categories: 250 Series Land Cruiser (2024+), 300 Series Land Cruiser (2021+), Dobinsons, Exceptions, IMS Monotube, LX600, Shocks + Struts - 300 Series, Shocks + Struts - LC250, Struts and Shocks, Suspension
Brand: Dobinsons Spring & Suspension
Description
Pair of front Dobinsons IMS59-60440 Internal Reservoir Monotube adjustable height struts (does not include coils or top mounts) for 2021+ Toyota Land Cruiser 300 Series Wagon, suitable for 0 – 3″ of lift, and is an Extended Travel option for 2024+ Toyota Land Cruiser 250 Series for 2-3″ of lift. These Dobinsons IMS59-60440 have an adjustable lower coil seat to fine tune lift height or any lean in the vehicle. These do not come with coil springs or top mounts. They do come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Dobinsons IMS59-60440 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Vehicle Fitment:
2021 Toyota Land Cruiser 300 Series
2022 Toyota Land Cruiser 300 Series
2023 Toyota Land Cruiser 300 Series
2024 Toyota Land Cruiser 300 Series
2024 Toyota Land Cruiser 250 Series
8 reviews for Dobinsons IMS59-60440 2.6″ IFP Front Struts Pair | LC250 LC300
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews)
Ryan (verified owner) –
Good quality, really nice.
Aaron (verified owner) –
5 Stars!!
Ryan (verified owner) –
It’s exactly what I wanted.
Matthew (verified owner) –
I received it really fast.
Nicholas (verified owner) –
Great description on the page, easy to understand what I was buying.
Jeremy (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
William (verified owner) –
It’s exactly what I wanted.
John (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.