Your cart is currently empty!
within 48 US States
Rusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
- Suits the following Jeep models
- 1997-2006 TJ Wrangler
- 2003-2006 LJ Unlimited
- 1984-2001 XJ Cherokee
- 1986-1993 MJ Comanche
- 1993-1998 ZJ Grand Cherokee
- 1997-2006 TJ Wrangler
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
- Built in Rainbow City, Alabama, USA
$167.00
In StockDescription
Rusty’s has offered various forms of sway bar quick-disconnects over the years, but each design produced by other companies had some limitation of one form or another, so Rusty’s decided to design and build our own! These disconnects offer ease of use, tremendous adjustability, unbeatable vehicle coverage, and major strength all in one package!
Rusty’s Adjustable Sway Bar Disconnects are available to fit all popular Jeep models, including JK, TJ, and YJ Wranglers, LJ Unlimiteds, XJ Cherokees, WJ and ZJ Grand Cherokees, and even CJs! The adjustable design accommodates lift kits between 2″ and 8.5″ of lift, and they can be adjusted without removing them from the vehicle. The forged steel construction is exceptionally strong and has a similar design to our bulletproof Forged Flex suspension joints. Stainless steel and Grade 8 hardware round out these exceptional links. When hooked up and properly adjusted, they allow the suspension to function just as it normally would, but by pulling a couple of pins, you free up suspension flex for exceptional off-road traction. These disconnects work with all of Rusty’s suspension systems as well as most other brands.
All necessary brackets and hardware are included. Priced per pair. Fits front sway bars only.
KEY FEATURES:
- Fits: TJ, LJ, XJ, MJ, and ZJ all years!
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
These Disconnects fit the following vehicles:
• 1997-2006 TJ Wrangler
• 2003-2006 LJ Unlimited
• 1984-2001 XJ Cherokee
• 1986-1993 MJ Comanche
• 1993-1998 ZJ Grand Cherokee
Vehicle Suitability:
1997 Jeep Wrangler TJ
1998 Jeep Wrangler TJ
1999 Jeep Wrangler TJ
2000 Jeep Wrangler TJ
2001 Jeep Wrangler TJ
2002 Jeep Wrangler TJ
2003 Jeep Wrangler TJ
2004 Jeep Wrangler TJ
2005 Jeep Wrangler TJ
2006 Jeep Wrangler TJ
2003 Jeep Wrangler LJ
2004 Jeep Wrangler LJ
2005 Jeep Wrangler LJ
2006 Jeep Wrangler LJ
1984 Jeep Cherokee XJ
1985 Jeep Cherokee XJ
1986 Jeep Cherokee XJ
1987 Jeep Cherokee XJ
1988 Jeep Cherokee XJ
1989 Jeep Cherokee XJ
1990 Jeep Cherokee XJ
1991 Jeep Cherokee XJ
1992 Jeep Cherokee XJ
1993 Jeep Cherokee XJ
1994 Jeep Cherokee XJ
1995 Jeep Cherokee XJ
1996 Jeep Cherokee XJ
1997 Jeep Cherokee XJ
1998 Jeep Cherokee XJ
1999 Jeep Cherokee XJ
2000 Jeep Cherokee XJ
2001 Jeep Cherokee XJ
1986 Jeep Comanche MJ
1987 Jeep Comanche MJ
1988 Jeep Comanche MJ
1989 Jeep Comanche MJ
1990 Jeep Comanche MJ
1991 Jeep Comanche MJ
1992 Jeep Comanche MJ
1993 Jeep Comanche MJ
1993 Jeep Grand Cherokee ZJ
1994 Jeep Grand Cherokee ZJ
1995 Jeep Grand Cherokee ZJ
1996 Jeep Grand Cherokee ZJ
1997 Jeep Grand Cherokee ZJ
1998 Jeep Grand Cherokee ZJ
Rusty’s Off-Road is a leader in the 4X4 industry with our innovative line of Jeep specific products. Our in-house manufacturing and R & D keeps our products on the cutting edge. With our in house manufacturing we are able to control cost and sell retail at wholesale cost without sacrificing quality.
We have over 45 years of hands on experience in the off-road vehicle industry giving us the knowledge that few of our competitors have. Rusty’s has grown from a small business serving a regional market to a worldwide company. We have grown from a small 2 bay shop to an ever growing 65,000 square foot building. Yes, we too started off with torches and big hammers but today it’s high-tech measuring devises, precision machining centers, lasers, robots and a group of very dedicated employees to produce what we think are the very best in off road products.
We proudly back our products as ‘Trail Tested Tough.’ Each of our parts go through extensive prototype testing on the trails, allowing us to improve and strengthen our designs so we release only the highest quality products. Moab, Rubicon, Tellico, Wind Rock, and Jeep Jamboree events around the country have been regular stomping grounds for the Rusty’s Off Road Testing Crew over the years. Many parts have been run and tested in some of the most grueling off road races and rallies and with this abuse and testing you can be assured you will be getting the very best part built.
7 reviews for Rusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
You must be logged in to post a review.
You may also like…
-
Dobinsons
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
Rated 5.00 out of 5(7 reviews)
Related products
-
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
Rated 5.00 out of 5(14 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5(8 reviews) -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
Rated 5.00 out of 5(14 reviews) -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5(12 reviews)
Jonathan (verified owner) –
5 Stars!!
Scott (verified owner) –
This is my go-to now for off road parts.
Justin (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Kenneth (verified owner) –
*****
Adam (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Eric (verified owner) –
Very fast delivery.
Chad (verified owner) –
Good quality, really nice.