“Dobinsons IMS59-60713 2.6″ IFP Rear Shocks Pair | Toyota Sequoia 2008-2022” has been added to your cart. Continue shopping
You may be interested in…
-
TimbrenFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Land Cruiser 80 Series 1990-1997
- Suits 1990-1997 Land Cruiser 80 Series and Lexus LX450
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC1 replaces the rear OEM bump stops and ABSTOFLC1A replaces the fronts on the Land Cruiser 80 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Clearancing of the rear brackets and the bump stop cups may be required on some long travel setups to avoid clearance issues with the coil springs
- Front Instructions and Rear Instructions
(11 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesExtended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A446 3-Way Adjustable Front Struts Pair | Tundra 22+, Sequoia 23+
- Suits Toyota Tundra 2022-2025+ and Toyota Sequoia 2023-2025+
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye
- Installation Instructions
(14 reviews) -
Sequoia 2nd Gen (2008-2022)Dobinsons C59-477 1.75″ Rear Coils for Toyota Sequoia 2008-2022 5.7L V8 – Pair
- C59-477 are made specifically for the 2008 to 2022 Toyota Sequoia with the 5.7L V8 to give 1.75″ (45mm) of rear lift
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 624LBF/in spring rate
- Sold in Pairs
(16 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA45-A912 3-Way Adjustable MRA Front Shocks Pair | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 4″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 667mm extended, 401mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Full 2 year limited warranty, no set rebuild time period
(15 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A713 3-Way Adjustable Rear Shocks Pair | Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A941 3-Way Adjustable MRA Long Travel Rear Shocks Pair
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 16.5″ compressed length, 26.9″ extended length, 10.4″ of travel
- SOLD IN PAIRS
- Includes reservoir brackets and hardware
- Installation Instructions
- These shocks require extended brake lines and extended bump stops to prevent bottom outs
(17 reviews) -
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons GS59-786 Ext Travel Front Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- **Photo for illustration purposes, not of actual shocks
- 470mm extended, 315mm compressed
- These shocks REQUIRE aftermarket UCA’s and a complete Diff Drop Kit
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60786 Front Ext Travel 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 Front End
- Requires full diff drop kit and UCA’s before installation
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
(17 reviews)
Cart totals
| Subtotal | $3,750.00 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $93.75 |
| Tax | $298.96 |
| Total | $4,378.71 |
