You may be interested in…

• 

  • 
  • 
  • 

  Late FJ Cruiser (2010-2016)

  FREE SHIPPING
  within 48 US States

  Dobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers for FJ Cruiser 2010+

  • Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
  • Looking for a quick and easy way to lift your FJ Cruiser?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by a fully threaded body
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • 560mm extended, 420mm compressed
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.  Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
  • Click to see Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (5 reviews)

  $1,199.00 Select options
• 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.0 IFP Smooth Body Shocks Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Suits up to 1.5″ of lift
  • Increased suspension travel
  • Vehicle specific valving providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 5/8″ shafts
  • What’s Included:
    • 2.0” IFP smooth body shocks Pair
    • Shock shaft boots
    • All necessary mounting hardware
    • Installation instructions

  Rated 4.25 out of 5

  (4 reviews)

  $538.00 Add to cart
• 

  • 
  • 
  • 

  Full Suspension Kits - FJC Early

  FREE SHIPPING
  within 48 US States

  Dobinsons 1.5-3.5″ Pre-Assembled IMS FJ Cruiser Coilovers for 2006-2009

  • Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
  • Looking for a quick and easy way to lift your FJ Cruiser?  This is your answer
  • Select your desired lift height and load rate – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by a fully threaded body
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.  Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
  • Link to Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (4 reviews)

  $1,199.00 Select options
• 

  • 
  • 
  • 

  Firestone

  FREE SHIPPING
  within 48 US States

  Firestone 2900 Air Command Air Compressor System

  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Light Duty Compressor Specs (100 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
  • Electric analog gauge and a single toggle switch (includes housing for easy installation).
  • Plug and play wiring harness.
  • 30ft of 1/4″ tubing. All required hardware for installation.
  • No-Drill Mounting Plate
  • Limited 2 Year Warranty
  • Dash Panel Style: Controls Two Air Springs Simultaneously
  • Type: Heavy Duty
  • Maximum Pressure (PSI): 100 Pounds Per Square Inch
  • Operation Type: Switch Operated
  • Estimated Install Time (Hours): 2
  • Installation Manual

  (0 reviews)

  $402.16 Add to cart
• 

  • 
  • 
  • 

  Late FJ Cruiser (2010-2016)

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for FJ Cruiser 2010+

  • Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
  • Looking for a quick and easy way to lift your FJ Cruiser?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by a fully threaded body
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • Extended Travel – 575mm fully extended, 430mm compressed
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment.  A diff drop kit is also recommended to minimize CV binding at full droop
  • Click to see Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (5 reviews)

  $1,199.00 Select options
• 

  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons GS59-713 Pair of Rear Shocks | Toyota Sequoia 2008-2022

  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Sold in Pairs
  • Dobinsons GS59-713 Specifications: 471mm extended, 315mm compressed
  • Add this kit when buying these shocks if you will be using these for 2.5″of lift

  Rated 5.00 out of 5

  (6 reviews)

  $310.00 Add to cart