You may be interested in…

• 

  Dobinsons

  Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)

  • Used in place of original leaf bolt when adding a leaf
  • Fits L59-111-R-R3 &  L59-112-R-R5 ONLY
  • Sold individually

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Requires lifted leaf springs to ensure proper fitment

  Rated 5.00 out of 5

  (7 reviews)

  $5.00 Add to cart
• 

  Add-a-Leaf

  FREE SHIPPING
  within 48 US States

  Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra

  • Suits 1995-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
  • Includes 2 x Progressive add-a-leaf sets (3 leaves each), 2 longer center pins and replacement longer U-bolts
  • Adds 1.5″ of lift approximately.  Different bed/cab configurations could see variations in lift height
  • Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
  • Feature 60mm diamond cut ends and anti-friction pads for smooth, squeak free performance
  • On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap
  • Instructions

  Rated 5.00 out of 5

  (6 reviews)

  $285.00 Add to cart
• 

  • 
  • 

  Timbren

  FREE SHIPPING
  within 48 US States

  Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus

  • Suits 2000-2025 Tundra,  2001-2025 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series, Lexus LX470 and LX570
  • Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
  • Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation – Installation Video
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Click here for instructions

  Rated 5.00 out of 5

  (12 reviews)

  $269.36 Add to cart
• 

  • 
  • 

  Wheelers Off Road

  FREE SHIPPING
  within 48 US States

  Wheeler’s Rear Tacoma U-Bolt Flip Kit + SuperBumps for 2005-2023 Tacoma

  • Suits 2005-2023 Toyota Tacoma 4×4 and Prerunner
  • Provides increased ground clearance under the axle by flipping the U-bolts upwards
  • U-bolt mounting Plates are Clear Zinc-Coated and 3/8″ Thick
  • Threaded Holes are 3/8″-16 with a 4″ Spread
  • Includes (4) Zinc-Coated 1/2″ Grade 5 U-bolts (8.75″ Long) with Zinc-Coated Hardware
  • Includes SuperBump Micro-Cellular Polyurethane Progressive Bump Stop Set
  • Installation Instructions

  Rated 5.00 out of 5

  (9 reviews)

  $350.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50940 Rear 2.2″ IFP Shocks Pair | 2005-23 Tacoma 00-06 Tundra

  • Suits Toyota Tacoma 2nd and 3rd Gen, 2005-2023, and Toyota Tundra 1st Gen 2000-2006
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Specification – 14.2″ compressed length, 24.2″ extended length
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (12 reviews)

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50941 Long Travel Rear 2.2″ IFP Shocks Pair for 2005-23 Tacoma

  • Suits Toyota Tacoma 2005-2023 2nd and 3rd Gen 4×4 and Prerunner models
  • Longer travel rear shocks for maximum down travel with a bolt-on shock
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Specifications 16.5″ compressed length, 26.9″ extended length
  • These shocks require extended brake lines and extended bump stops
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (18 reviews)

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Rooftop Tents

  FREE SHIPPING
  within 48 US States

  Overland Vehicle Systems Portable Safari Tent – Quick Deploying Ground Tent

  • Sets up in under a minute, plus time to setup tent pegs and awning
  • Tear down is a breeze, quicker than setting it up
  • Much lighter than a Roof Top Tent (only 40LBS) and can be left at camp easily or in the closet when not in use
  • Excellent ventilation out the front doors and side windows
  • Manufactured from high quality waterproof water proof 420 Oxford
  • Waterproof Polyurethane coating for maximum water resistance, Breathable, UV & Mold Resistant
  • Heavy-duty YKK zippers
  • Fully enclosed w/a ceiling & heavy duty floor
  • Telescoping Poles to hold out awning
  • Built-in awning to roll out and protect the entrance to the tent as well as give shelter in bad weather
  • Completely waterproof
  • Can sleep up to 4- 5 people comfortably
  • Includes: Storage Bag
  • Weight – 40LBS

  When Opened, it Measures

  • Length: 92 inches
  • Width: 76 Inches
  • Height: 78 Inches

  When Closed, it Measures

  • Length: 79 inches
  • Width: 7 inches
  • Height: 10 inches

  Rated 5.00 out of 5

  (8 reviews)

  $599.99 Add to cart
• 

  • 
  • 
  • 

  Tacoma 2nd Gen (2005-2015)

  FREE SHIPPING
  within 48 US States

  Dirt King Performance Tacoma Lower Control Arms Pair for 2005-2015

  • Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  Rated 5.00 out of 5

  (4 reviews)

  $1,812.00 Add to cart
• 

  • 
  • 
  • 

  Tacoma 3rd Gen (2016-2023)

  FREE SHIPPING
  within 48 US States

  Dirt King Performance Tacoma Lower Control Arms Pair for 2016-2023

  • Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  Rated 5.00 out of 5

  (4 reviews)

  $1,812.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  FREE SHIPPING
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s Pair | Tacoma Hilux Fortuner 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side, fully assembled with ball joints pressed in
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Replacement Ball Joints can be ordered Here

  Rated 5.00 out of 5

  (9 reviews)

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  FREE SHIPPING
  within 48 US States

  2005-2023 Tacoma Engine Skid Plate – Aluminum Black Powder Coated

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 1/4-inch aluminum construction – Black Powder Coated Steel
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Made in the USA
  • Installation Instructions

  Rated 4.71 out of 5

  (7 reviews)

  $433.00 Add to cart
• 

  Brake Lines

  FREE SHIPPING
  within 48 US States

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  Rated 5.00 out of 5

  (9 reviews)

  $120.00 Add to cart
• 

  On Backorder

  • 
  • 

  Air Compressors

  FREE SHIPPING
  within 48 US States

  EGOI Portable Dual Motor Air Compressor System 12.6 CFM

  • This is the Dual Motor Version – 12.6 CFM
  • Powerful Motors: 12.6 CFM: Dual Motor at 12.6 cubic feet per minute (CFM) output, these compressors can tackle a wide range of tasks with ease, from inflating tires to powering pneumatic tools.
  • Intuitive Control Panel: The integrated control panel puts you in command, allowing you to adjust settings and monitor performance effortlessly.
  • Performance: Dual Motor 12.6 CFM output, these compressors provide the performance you need for both leisure and work applications.
  • Precision: The user-friendly control panel and versatile attachments allow you to tailor the system to your specific requirements.
  • Portability: The included storage bag makes it easy to transport your EGOI System to any location, ensuring you have access to air when and where it’s needed.
  • Complete Kit: The EGOI System arrives with all you need for immediate action, including a storage bag for easy transport and storage.
  • High-Quality Hose: A durable and high-quality hose is included, providing you with the flexibility and reach to accomplish various tasks.
  • Versatile Attachments: The kit also contains a variety of attachments, ensuring that you’re ready for any inflation or air supply task.
  • 8’ Heavy Duty Power Cables with Alligator Clips that Easily Connect to the Battery
  • Maximum Voltage of 13.8 V
  • Built-In Thermal Cut Off Switch
  • Maximum Air Pressure of 150 PSI
  • 24” Coiled High-Quality Hose With Pressure Gauge & Quick Release Fittings

  Rated 5.00 out of 5

  (6 reviews)

  $319.99 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks Pair | Tundra 2007-2021

  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (16 reviews)

  $1,350.00 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  Rated 5.00 out of 5

  (4 reviews)

  $69.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  FREE SHIPPING
  within 48 US States

  2005-2023 Tacoma Engine Skid Plate – Raw Aluminum

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 1/4-inch aluminum construction – Raw aluminum
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Made in the USA
  • Installation Instructions

  Rated 4.57 out of 5

  (7 reviews)

  $373.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Dobinsons High Clearance Outer CV Boot Kit | Toyota Hilux

  • Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
  • If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
  • Made of high quality rubber for maximum life
  • Suits Toyota Hilux Vigo and Revo 2005-2024
  • These have been known to fit onto other models unofficially
  • Inside shape is round
  • These still install the old fashioned way without custom stretch boot tools needed
  • Installation Instructions
  • Link to Inner Boot Kit

  Rated 5.00 out of 5

  (19 reviews)

  $60.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-60711 2.6″ IFP Rear Shocks Pair | Toyota Tundra 2007-2021

  • Suits 2007-2021 Toyota Tundra, for lift heights between 0″ and 2.5″
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 642mm extended, 401mm compressed lengths
  • Note: the video shows an IMS front strut that takes a coil.  This listing is for the rear IMS shock, no adjustability.

  Rated 5.00 out of 5

  (17 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  FREE SHIPPING
  within 48 US States

  2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Black Powder Coated Steel
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Made in the USA
  • Installation Instructions

  Rated 4.43 out of 5

  (7 reviews)

  $433.00 Add to cart
• 

  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.0 IFP Tundra Coilovers Pair | Toyota Tundra 2007-2021

  • Suits Toyota Tundra 2nd Gen 2007-2021 2WD and 4WD
  • Comes preset for 2.5″ of lift
  • Increased suspension travel
  • Vehicle specific valving providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 5/8″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.0 Dirt King IFP Series coilovers Pair
    • Coils installed are 16” long, 700 LBF/in Spring Rate
    • Spanner wrench to adjust height/preload
    • All necessary mounting hardware
    • Installation instructions

  Rated 4.50 out of 5

  (4 reviews)

  $1,175.00 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  FREE SHIPPING
  within 48 US States

  Dirt King Performance Tundra Lower Control Arms Pair – Tundra + Sequoia

  • Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  Rated 5.00 out of 5

  (4 reviews)

  $2,155.00 Add to cart
• 

  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.0 IFP Tacoma Coilovers Pair | Tacoma 2005-2023

  • Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
  • Comes preset to 2.5″ of lift with stock weight
  • Increased suspension travel
  • Vehicle specific valving providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 5/8″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.0 Dirt King IFP Series coilovers Pair
    • Coils installed are 14” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts
    • Spanner wrench to adjust height/preload
    • All necessary mounting hardware
    • Installation instructions

  Rated 4.50 out of 5

  (4 reviews)

  $1,175.00 Select options
• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 Tundra DCA Remote Resi Coilovers | 2007-2021

  • Suits Toyota Tundra 2007-2021 2WD and 4WD
  • Comes preset to 2.5″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.5 DCA coilover shocks with remote reservoirs Pair
    • Coils installed are 16” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts with reservoir brackets
    • Spanner wrench
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below
  • Matching Rear Shocks

  Rated 4.00 out of 5

  (4 reviews)

  $2,253.00 Add to cart
• 

  Brake Lines

  FREE SHIPPING
  within 48 US States

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  Rated 5.00 out of 5

  (26 reviews)

  $120.00 Add to cart
• 

  Excluded

  Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)

  • Suits 2005-2023 Toyota Tacoma.  Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
  • Click here for Extra Leaf Kit for additional load support
  • These are leaf springs ONLY and don’t come with bushings or any other parts.  Scroll down for add-ons that go with these springs
  • Sold as a pair – they are not side-specific

  Rated 5.00 out of 5

  (4 reviews)

  $590.00 Add to cart