You may be interested in…

• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 Tundra DCA Remote Resi Coilovers | 2007-2021

  • Suits Toyota Tundra 2007-2021 2WD and 4WD
  • Comes preset to 2.5″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.5 DCA coilover shocks with remote reservoirs Pair
    • Coils installed are 16” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts with reservoir brackets
    • Spanner wrench
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below
  • Matching Rear Shocks

  Rated 4.00 out of 5

  (4 reviews)

  $2,253.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-60711 2.6″ IFP Rear Shocks Pair | Toyota Tundra 2007-2021

  • Suits 2007-2021 Toyota Tundra, for lift heights between 0″ and 2.5″
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 642mm extended, 401mm compressed lengths
  • Note: the video shows an IMS front strut that takes a coil.  This listing is for the rear IMS shock, no adjustability.

  Rated 5.00 out of 5

  (17 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  Dobinsons Rear Leaf Springs Options for Toyota Tundra 2007-21

  • Suits Toyota Tundra 2007-2021
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride

  Rated 5.00 out of 5

  (9 reviews)

  From $710.00 Select options
• 

  • 
  • 
  • 

  Excluded

  FREE SHIPPING
  within 48 US States

  Tax Return Sale, 5% off
  Use Coupon TAXTIME

  Expedition Truck Cap Crossbars | 3 Sizes

  • Designed to work with OVS Expedition Caps
  • Cross bars are compatible with most roof rack accessories
  • Ideal for mounting tents, awnings, shower tents, storage boxes, kayaks, skis, and more
  • Removable end caps for easy access to T-slot attachments
  • Weatherproof design resists rust and corrosion
  • Sturdy aluminum construction supports up to 325 lbs dynamic and 750 lbs static with OVS Expedition Caps
  • Aerodynamic, low-profile 2.75” design reduces wind noise
  • Sleek, finished look with end caps
  • Includes risers and all necessary hardware for easy installation
  • Sold in pairs
  • Available in 3 width sizes: 51.25”, 55”, and 72”

  (0 reviews)

  From $229.99 Select options
• 

  Tundra 3rd Gen (2022-2025+)

  FREE SHIPPING
  within 48 US States

  Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K

  • Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
  • Fully adjustable to properly set the length and pinion angle
  • On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
  • Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection
  • **Not suitable for vehicles with rear height sensors (attached to OEM arms)
  • Trailing arms DO NOT have headlight adjustment bracket
  • Instructions written down below in the description

  Rated 5.00 out of 5

  (4 reviews)

  $345.00 Add to cart
• 

  Tundra 2nd Gen (2007-2021)

  Dobinsons UB59-437K Rear U-Bolts (2 Pairs)

  • These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R), also fit other International trucks and SUV’s
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Includes 4 U-bolts, enough for 1 vehicle
  • Requires 2″ lift leaf springs to ensure proper fitment
  • These are a 30mm longer version of UB59-453-2K Ubolts
  • These are 210mm / 8.25″ in length
  • Photo for illustration purposes.  These are square at the top

  Rated 5.00 out of 5

  (7 reviews)

  $90.00 Add to cart
• Sale!

  Tacoma 4th Gen (2024-2025+)

  FREE SHIPPING
  within 48 US States

  On Sale All April !!!

  Icon 2024 Toyota LC250 / Tacoma Diff Drop Kit

  • Suits 2024+ Toyota Tacoma and 2024+ Land Cruiser 250
  • Drops front differential to provide better maximum operating angle for CV joints
  • Maximizes available suspension travel when paired with ICON coilovers
  • CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
  • Polyurethane bushings limit deflection and prevent differential movement under load
  • 100% Bolt-on with no cutting or welding necessary for installation
  • Required for installation of ICON coilover kits on 4WD 2024 Toyota Tacoma and Land Cruiser 250 models and GX550
  • Installation Guide

  (0 reviews)

  $230.95 Original price was: $230.95.$208.00Current price is: $208.00. Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23

  • Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
  • Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Has more clearance around the ball joint than factory UCA’s for better tire clearance
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints
  • Replacement Ball Joints can be ordered Here

  Rated 5.00 out of 5

  (9 reviews)

  $795.00 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  Rated 5.00 out of 5

  (4 reviews)

  $69.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks Pair | Tundra 2007-2021

  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (16 reviews)

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  SPC

  FREE SHIPPING
  within 48 US States

  Tax Return Sale, 5% off
  Use Coupon TAXTIME

  SPC 25485 | UCA’s for 2001-07 Sequoia & 1999-06 Tundra Pair

  • Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
  • Improved clearance to get around the spring bucket
  • 80° of articulation in its ball joint
  • SPC’s arm gives you maximum droop travel.
  • SPC’s arms have +1° of caster built into them
  • Arm will get you 0° to +4° of caster and ±2° of camber
  • Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
  • Installation Instructions

  Rated 5.00 out of 5

  (11 reviews)

  $895.96 Add to cart
• Sale!

  • 
  • 
  • 

  Control Arms - Tundra 2022+

  FREE SHIPPING
  within 48 US States

  On Sale All April !!!

  Icon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma

  • Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models and 2024-2025+ Tacoma
  • On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
  • Vehicle specific, high clearance design for reduced link contact with obstacles
  • Replaceable Nylon Rock Slider to protect the link from damage
  • CNC machined 6061 aluminum construction
  • Large FK Bearing JMX16T PTFE-lined rod ends
  • Maintenance free, dual durometer bushings for maximum angularity and noise isolation
  • Covered by ICON’s Limited Lifetime Warranty
  • Installation Guide
  • Warranty Info

  Rated 5.00 out of 5

  (10 reviews)

  $1,399.95 Original price was: $1,399.95.$1,260.00Current price is: $1,260.00. Add to cart
• 

  • 
  • 
  • 

  Brakes

  FREE SHIPPING
  within 48 US States

  Powerbrake X-Line 4×4 Front Toyota Tundra Big Brake Kit for 2000-2006

  2000-2006 Toyota Tundra Big Brake Kit Includes:

  • X-Line billet 6-piston off-road calipers (pair)
  • High-performance brake pads, pre-loaded into the calipers
  • 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
  • Curved, directional cooling vanes
  • Billet caliper mounting brackets
  • Stainless steel braided brake lines
  • All necessary mounting hardware for quick, easy bolt-on installation
  • Comprehensive fitment and bed-in instructions
  • For 6-Lug models only (Pre-Runner and 4×4 models)
  • Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
  • Manufactured, finished and packaged 100% in South Africa
  • REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE

  Rated 5.00 out of 5

  (4 reviews)

  $2,675.00 Select options This product has multiple variants. The options may be chosen on the product page
• 

  • 
  • 
  • 

  Upper Control Arms

  FREE SHIPPING
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s Pair | Tacoma Hilux Fortuner 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side, fully assembled with ball joints pressed in
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Replacement Ball Joints can be ordered Here

  Rated 5.00 out of 5

  (9 reviews)

  $1,195.00 Add to cart