“Timbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops 1990-1997” has been added to your cart. Continue shopping
You may be interested in…
-
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Tundra Coilovers Pair | Toyota Tundra 2007-2021
- Suits Toyota Tundra 2nd Gen 2007-2021 2WD and 4WD
- Comes preset for 2.5″ of lift
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 16” long, 700 LBF/in Spring Rate
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
(4 reviews) -
SamuraiFREE SHIPPING
within 48 US StatesSuzuki Samurai 6.5:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1)
- Includes four new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Upgraded Trail-Safe seals included at no additional cost
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 chromoly alloy steel for its great strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Installation Instructions
- Special Seal Instructions
(9 reviews) -
Full Suspension Kits - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons 2.0-3.0″ 3-Way Adjustable MRR Coilovers | Toyota Tundra 2007-21
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- The Dobinsons MRR Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- 625mm extended length, 450mm compressed length
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware and Sticker Pack
- Full 2 year limited warranty, no set rebuild time period
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
- Front coilover assembly instructions
- Link to Matching rear shocks
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(4 reviews) -
SamuraiFREE SHIPPING
within 48 US StatesSuzuki Samurai 4.16:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 4.16 to 1 (84% low range reduction). High Range reduction is 12%
- Includes new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Note: The recommended tire size for the 4.16 gears is 29″-30″
- Installation Instructions
(9 reviews) -
Struts + Shocks - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDirt King 2.5 Tundra DCA Remote Resi Shocks| 2007-2021
- Suits Toyota Tundra 2007-2021 2WD and 4WD
- Suits up to 1.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- What’s Included:
- 2.5 DCA shocks with remote reservoirs Pair
- Shock shaft boots
- Reservoir mounts
- All necessary mounting hardware
- Installation instructions
- Matching Front Coilovers
(4 reviews) -
Trail-Gear
Suzuki Rear Axle Bearing Kit – Sidekick & Tracker
- Suits 1989 to 1998 Suzuki Sidekick, Geo Tracker and Chevy Tracker with 4-bolt style axles
- Genuine Koyo brand bearing with integral spacer
- Ground bearing retainer
- OEM quality Inner Rear Axle Wheel Seal
- OEM quality Outer Rear Axle Wheel Seal
- Note: This kit will rebuild one side of your rear axle. To rebuild an entire rear axle, you will need to order two kits
(9 reviews)
Cart totals
| Subtotal | $3,587.36 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $89.68 |
| Tax | $276.95 |
| Total | $4,058.99 |
