You may be interested in…

• 

  • 
  • 
  • 

  Dobinsons

  Dobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair

  • Fully Designed, Manufactured, and Finished In Australia
  • Ultra modern design technology, Fully Scragged & Load Tested
  • State of the Art Heat Treatment, High Intensity Shot Peened
  • Formed on Precision Mandrels, Precise End Configurations
  • Durable Powder Coat Finish
  • Sold in Pairs
  • 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
  • This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate

  Rated 5.00 out of 5

  (15 reviews)

  $270.00 Select options This product has multiple variants. The options may be chosen on the product page
• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 DCA Remote Resi Shocks | 4Runner FJ GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Suits up to 1.5″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • What’s Included:
    • 2.5 DCA shocks with remote reservoirs Pair
    • Shock shaft boots
    • Reservoir mounts
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below

  Rated 4.50 out of 5

  (4 reviews)

  $1,567.00 Add to cart
• 

  Sequoia 1st Gen (2001-2007)

  Dobinsons Rear Stock Height Coils | Sequoia 2001-2007 – Pair Teal

  • Stock height replacement rear coils for Toyota Sequoia 2001-2007 4×4
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • State of the Art Heat Treatment
  • High Intensity Shot Peened
  • Formed on Precision Mandrels
  • Precise End Configurations
  • Sold in Pairs

  Rated 5.00 out of 5

  (8 reviews)

  $270.00 Add to cart
• 

  • 
  • 
  • 

  Full Suspension Kits - 5th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for Toyota 4Runner 5th Gen 2010-2024

  • Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by a fully threaded body
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • Extended Travel – 575mm fully extended, 430mm compressed
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment.  A diff drop kit is also recommended to minimize CV binding at full droop
  • Click to see Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order
  • Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge.  Many vehicles come in at different heights from the factory based on trim levels and options

  Rated 5.00 out of 5

  (5 reviews)

  $1,199.00 Select options
• 

  • 
  • 
  • 

  Performance Upgrades - 4th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Powerbrake D-Line HP Rotor and Pad Kit | 4Runner Front 03-09

  • Suits Toyota 4Runner 2003-2009 Front with OE 12.55″ Rotor Size
  • Measure rotor size for 12.55″ diameter, or check back of brake caliper for stamping of “13WG” or “13WL”
  • Also available for the REAR
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  Rated 5.00 out of 5

  (6 reviews)

  $810.00 Select options
• 

  • 
  • 
  • 

  SPC

  FREE SHIPPING
  within 48 US States

  Tax Return Sale, 5% off
  Use Coupon TAXTIME

  SPC 25485 | UCA’s for 2001-07 Sequoia & 1999-06 Tundra Pair

  • Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
  • Improved clearance to get around the spring bucket
  • 80° of articulation in its ball joint
  • SPC’s arm gives you maximum droop travel.
  • SPC’s arms have +1° of caster built into them
  • Arm will get you 0° to +4° of caster and ±2° of camber
  • Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
  • Installation Instructions

  Rated 5.00 out of 5

  (11 reviews)

  $895.96 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50701 2.2″ IFP Shocks Pair | Toyota and Lexus (0-3″ lift)

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
  • Specifications: 598mm extended, 389mm compressed

  Rated 5.00 out of 5

  (16 reviews)

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Full Suspension Kits - 4th Gen 4runner

  FREE SHIPPING
  within 48 US States

  Dobinsons 1-3.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 4th Gen 2003-2009

  • Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by a fully threaded body
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.  Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
  • Click to see Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (5 reviews)

  $1,199.00 Select options
• 

  • 
  • 
  • 

  Full Suspension Kits - 5th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-3.5″ Extended Travel 3-Way Adj MRA Coilovers | 4Runner 5th Gen 2010-2024

  • Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models – Extended Travel
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • MRA59-A574 Extended Travel – 575mm extended, 420mm compressed
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Resi installation instructions
  • To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment.  A diff drop kit is also recommended to minimize CV binding at full droop
  • Link to Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order
  • Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge.  Many vehicles come in at different heights from the factory based on trim levels and options

  Rated 5.00 out of 5

  (3 reviews)

  $1,820.00 Select options
• 

  • 
  • 
  • 

  Full Suspension Kits - 5th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Dobinsons 1-2.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 5th Gen 2010-2024

  • Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by a fully threaded body
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • 560mm extended, 420mm compressed
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.  Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
  • Click to see Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order
  • Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge.  Many vehicles come in at different heights from the factory based on trim levels and options

  Rated 5.00 out of 5

  (7 reviews)

  $1,199.00 Select options
• 

  • 
  • 
  • 

  Performance Upgrades - 4th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Powerbrake D-Line HP Rotor and Pad Kit | 4Runner Sport Front 03-09

  • Suits Toyota 4Runner Sport 2003-2009 Front with OE 13.3″ Rotor Size
  • Measure rotor size for 13.3″ diameter, or check back of brake caliper for stamping of “13WH”
  • Also available for the REAR
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  Rated 5.00 out of 5

  (5 reviews)

  $810.00 Select options