“Dobinsons Billet Adjustable Rear Lower Control Arms Pair | WA59-747K” has been added to your cart. Continue shopping
You may be interested in…
-
Shocks + Struts - 3rd Gen 4RunnerFREE SHIPPING
within 48 US StatesDobinsons MRA59-A225 3-Way Adjustable Rear Shocks Pair | 3rd Gen 4Runner 1996-2002
- Suits 3rd Gen Toyota 4Runner 1996-2002
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- 530mm extended length, 344 compressed
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(15 reviews) -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Toyota Hilux
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Suits Toyota Hilux Vigo and Revo 2005-2024
- These have been known to fit onto other models unofficially
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
- Installation Instructions
- Link to Inner Boot Kit
(19 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews) -
Tundra 1st Gen (2000-2006)FREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra Sequoia 03-06 Front
- Suits Toyota Sequoia and Toyota Tundra 2003-2006 Only with caliper stamped “13WL” (see attached photo for reference) – 4×4 Models with 6 lug hubs
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(6 reviews) -
Dobinsons
Dobinsons SC59-002 Pair of Strut Top Plates
- Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Also suits 2012-2024 Isuzu D-Max and 2020+ Mazda BT-50
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Photo is of actual product and parts included
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Assembly Instructions
(9 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
(15 reviews) -
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews) -
Dobinsons
Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A649 3-Way Adjustable Rear Shocks Pair for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- 22mm / 7/8″ shaft diameter
- Full 2 year limited warranty, no set rebuild time period
- Should be run with a suspension lift of 1.75″ or more
(15 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma Hilux
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota Hilux Vigo and Revo (2005-2024)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
- Installation Instructions
- Link to Outer Boot Kit
(17 reviews) -
Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMEIcon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models and 2024-2025+ Tacoma
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews)
Cart totals
| Subtotal | $7,259.67 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $547.56 |
| Total | $7,848.23 |
