You may be interested in…
-
Brake Lines
Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
$95.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesWarn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDobinsons MRA59-A710 3-Way Adjustable MRA Front Struts | Tundra 2007-2021
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
$1,790.00 Add to cart -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
$120.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 14.2″ compressed length, 24.2″ extended length
- Installation Instructions
- Works with factory brake line length and OE bump stop length, no extensions required
- Includes reservoir brackets and hardware
- SOLD IN PAIRS
$1,150.00 Add to cart -
Bump Stops
Wheeler’s Rear Superbumps for 95+ Tacoma and 99-06 Tundra
- Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
$221.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesWarn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Front Bumpers
WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$999.99 Add to cart
Cart totals
Subtotal | $12,616.99 |
---|---|
Shipping |
Shipping to FL. |
Tax | $946.30 |
Total | $13,863.29 |