You may be interested in…

• 

  • 
  • 
  • 

  Full Suspension Kits - Tundra 2nd Gen

  FREE SHIPPING
  within 48 US States

  Dobinsons 2.0-3.0″ 3-Way Adjustable MRA Coilovers | Tundra 2007-21

  • Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
  • Looking for a quick and easy way to lift your Tundra?  This is your answer
  • Coils are teal. Struts are black
  • Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
  • 625mm extended length, 450mm compressed length
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
  • See attached photo for correct hose routing
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware and Sticker Pack
  • Full 2 year limited warranty, no set rebuild time period
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. 
  • Front coilover assembly instructions
  • Link to Matching rear shocks
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (4 reviews)

  From $2,210.00 Select options
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks Pair

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
  • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
  • EDP Surface Protection, Direct Bolt-On Design
  • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
  • 14.2″ compressed length, 24.2″ extended length
  • Installation Instructions
  • Works with factory brake line length and OE bump stop length, no extensions required
  • Includes reservoir brackets and hardware
  • SOLD IN PAIRS

  Rated 5.00 out of 5

  (16 reviews)

  $1,150.00 Add to cart
• 

  Dobinsons

  Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22

  • Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold in pairs
  • Photo for illustration purposes

  Rated 5.00 out of 5

  (7 reviews)

  $120.00 Add to cart
• 

  Brake Lines

  FREE SHIPPING
  within 48 US States

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  Rated 5.00 out of 5

  (9 reviews)

  $120.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus

  • Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Adjustable height through fully threaded body
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  Rated 5.00 out of 5

  (15 reviews)

  $650.00 Add to cart
• 

  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.0 IFP Tundra Coilovers Pair | Toyota Tundra 2007-2021

  • Suits Toyota Tundra 2nd Gen 2007-2021 2WD and 4WD
  • Comes preset for 2.5″ of lift
  • Increased suspension travel
  • Vehicle specific valving providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 5/8″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.0 Dirt King IFP Series coilovers Pair
    • Coils installed are 16” long, 700 LBF/in Spring Rate
    • Spanner wrench to adjust height/preload
    • All necessary mounting hardware
    • Installation instructions

  Rated 4.50 out of 5

  (4 reviews)

  $1,175.00 Add to cart
• 

  • 
  • 
  • 

  Struts + Shocks - Tundra 2nd Gen

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 Tundra DCA Remote Resi Shocks| 2007-2021

  • Suits Toyota Tundra 2007-2021 2WD and 4WD
  • Suits up to 1.5″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • What’s Included:
    • 2.5 DCA shocks with remote reservoirs Pair
    • Shock shaft boots
    • Reservoir mounts
    • All necessary mounting hardware
    • Installation instructions
  • Matching Front Coilovers

  Rated 4.25 out of 5

  (4 reviews)

  $1,567.00 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A710 3-Way Adjustable MRA Front Struts Pair | Tundra + Sequoia

  • Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
  • Pair of Struts only, no coils included and not preassembled
  • If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
  • 625mm extended length, 450mm compressed length
  • Height adjustable with a fully threaded body
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
  • See attached photo for correct hose routing, can vary depending on UCA’s used
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware and Sticker Pack
  • SOLD IN PAIRS
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs – sold separately
  • Front coilover assembly instructions
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
  • Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
  • Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping

  Rated 5.00 out of 5

  (12 reviews)

  $1,790.00 Add to cart
• 

  Dobinsons

  Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s

  • Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold as pairs
  • Product comes exactly as shown in the photo
  • Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
  • Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
  • Installation instructions

  Rated 5.00 out of 5

  (18 reviews)

  $120.00 Add to cart
• 

  • 
  • 
  • 

  Bump Stops + Spacers

  FREE SHIPPING
  within 48 US States

  Wheeler’s Rear Superbumps for 95-23 Tacoma and 99-06 Tundra

  • Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
  • Bolts in easily and quickly to replace the firm factory bump stops
  • Includes necessary bump stops (2), goes under the factory u-bolts
  • Made of a super durable micro-cellular polyurethane formula
  • Provides controlled, progressive and comfortable bottoming response from your front suspension
  • Installation Instructions

  Rated 5.00 out of 5

  (9 reviews)

  $240.00 Add to cart