You may be interested in…
-
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
WarnShips FREE !!
within 48 US StatesWarn 107856 Elite Front Bumper w/Grille Guard | Ford Bronco 2021-2023
- Suits Ford Bronco 2021-2023 (Fullsize Bronco)
- MADE IN USA
- Welded, One-Piece Construction Uses 3/16 Inch Thick Steel
- Grille Guards Constructed Of Large Diameter, Welded Steel Tubing For Maximum Durability
- Welded Eyelets For D-Shackles Providing Increased Recovery Options
- Bumper Designs Provide Generous Tire Clearance And Accommodate Oversize Tires
- Integrated Off-Road Jack Lifting Points
- Tested To 12,000 Pound Pulling Capacity
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: Yes
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: Not Compatible With D-Rings
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 4
- INSTALLATION INSTRUCTIONS
Original price was: $2,044.34.$1,640.00Current price is: $1,640.00. Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A687 3-Way Adjustable MRA Rear Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4-5″ of lift, or when used in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart -
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00 Add to cart
Cart totals
Subtotal | $13,797.94 |
---|---|
Shipping |
Shipping to FL. |
Tax | $1,034.87 |
Total | $15,178.81 |