Your cart is currently empty!
2024+ Toyota Tacoma Engine Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Weights: 3/16″ Steel 51 LBS, 1/4″ Aluminum 21 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Engine Skidplate requires the front crossmember below the radiator
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
- If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate Crossmember
- MADE IN LOVELAND, COLORADO, USA
$469.99 Original price was: $469.99.$398.99Current price is: $398.99.
Description
New 2024+ Tacoma Engine Skid Plate from RCI will provide the maximum protection for your 2024+ Tacoma with a skid plate package by RCI Offroad! This company is the first to not only offer a full package, but to offer it in a choice of steel or aluminum. Built in Colorado, you can’t go wrong with a set of these heavy duty skid plates to properly protect the underside of your brand new Toyota Truck. Everyone knows that as soon as you hit the trail and smack against a few rocks, the underside of the Tacoma can easily get beat up, making it harder to get the original skid plates on and off, and also potentially leading to further damage under there.
Protect your investment with RCI skids, the ultimate defense for all on and off-road hazards.
Built with your choice of laser cut 3/16″ steel or 1/4″ aluminum, this package is custom fit to protect all 4th generation Tacomas with premium quality, fit and finish.
2024 Tacoma Engine Skid Plate KEY FEATURES
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Engine Skidplate requires the front crossmember below the radiator
- Direct bolt on addition to existing factory attachment points, no drilling requiredÂ
- ** If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate CrossmemberÂ
WEIGHT
- 3/16″ Steel 51lbs
- 1/4″ Aluminum 21lbs
FITMENT
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
INCLUDED COMPONENTS
- Engine Skid Plate
- Standoff Bracket (Always Steel Black Powder Coated)
- Hardware Kit
Vehicle Suitability:
2024 Toyota Tacoma
4th Gen Toyota Tacoma
You must be logged in to post a review.
Related products
-
4Runner 4th Gen (2003-2009)Memorial Day Sale!!!
RCI Rock Sliders | 03-09 Toyota 4Runner + Lexus GX470
- Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
- Made to order from your selections below
- Made in USA
Rated 5.00 out of 5(5 reviews) -
Rear Bumpers
Dobinsons Land Cruiser 62 Series Rear Bumper with Tire + Jerry Can Carrier HJ61 FJ62
- Suits 1987-1990 HJ61 and FJ62 models only due to rear cross member difference
- Using it on an earlier model will require customization on customer’s end – see cross member photo
- Original cross member must have the 4 center mounting holes that the new Dobinsons bumper will use
- The earlier model frames are not as wide as the later model, so you’ll have to make fill-in pieces for proper fitment
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Choose from Single or Twin jerry can holder
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5(12 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesPrice Increase Coming June 2ndARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
Rated 5.00 out of 5(11 reviews) -
Tundra 2nd Gen (2007-2021)Memorial Day Sale!!!
RCI Skid Plate Set | Toyota 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front, transmission/transfer-case skid plates
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
Rated 5.00 out of 5(9 reviews)
Reviews
There are no reviews yet.