Sale!
80 Series Extended Brake Line Kit for 1991-1992 up to 4 lift (1) 304381
80 Series Extended Brake Line Kit for 1991-1992 up to 4 lift (1) 304381
On Sale All November!!

80 Series Extended Brake Line Kit for 1991-1992 up to 4″ lift

(35 customer reviews)
  • Suits 1991 to 1992 80 Series Land Cruisers ONLY
  • Extended brake line kit to suit lift heights of up to 4″ of lift ONLY
  • Extruded PTFE (Teflon) Hose with Braided Stainless Steel Cover and Clear PVC Outer Jacket
  • Permanently Crimped Zinc-Plated Fittings
  • Includes 1 front and 1 rear extended brake line
  • Includes Retention Clips
  • Meets DOT MVSS-106
  • Always compare stock brake lines and fittings to the new ones before disconnecting the old lines
  • Instructions

Original price was: $116.00.Current price is: $98.60.

In Stock
Share (0)
Total: 0 Total: 0
SKU: TG-304381-1-KIT Categories: , , , , , Brand:

Description

1991-1992 FJ80 Extended Brake Line Kit

Our DOT approved FJ80 Land Cruiser Extended Brake Line Kits are suitable for all 1991-1992 FJ80 Land Cruisers with up to 4″ [102mm] of lift. These brake lines are constructed from extruded PTFE (Teflon™) hose with permanently crimped zinc-plated steel fittings. The brake hose is protected from debris and abrasion by a braided stainless steel wire cover. A clear PVC outer jacket provides additional protection against debris, abrasion, and corrosion.

These extended brake lines are a direct fit and exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106. They come in a complete set of one front brake line and one rear brake line along with two retention clips and installation instructions.

 WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

 

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

To begin your warranty claim:

    • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
    • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.  Ship all products to:
      ATTN: WARRANTY
      5356 E. Pine Avenue
      Fresno, CA 93727.
    • Please place a clearly marked copy of the original invoice inside the package.
    • Please include a short note stating the problem you are experiencing.

 

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Vehicle Fitment:

1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series

35 reviews for 80 Series Extended Brake Line Kit for 1991-1992 up to 4″ lift

  1. Matthew (verified owner) –

    Just what I needed.

  2. Adam (verified owner) –

    Very good customer service, super friendly.

  3. John (verified owner) –

    Would definitely buy from this site again.

  4. Christopher (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  5. Jacob (verified owner) –

    I received it really fast.

  6. Matthew (verified owner) –

    Value for money, super satisfied.

  7. Eric (verified owner) –

    Just what I needed.

  8. Justin (verified owner) –

    Value for money, super satisfied.

  9. Benjamin (verified owner) –

    Very good customer service, super friendly.

  10. Andrew (verified owner) –

    Value for money, super satisfied.

  11. Adam (verified owner) –

    5 Stars!!

  12. Kenneth (verified owner) –

    Very good customer service, super friendly.

  13. Mark (verified owner) –

    Value for money, super satisfied.

  14. Jesse (verified owner) –

    Just what I needed.

  15. Michael (verified owner) –

    Just what I needed.

  16. Stephen (verified owner) –

    I received it really fast.

  17. Timothy (verified owner) –

    Good quality, really nice.

  18. Jeremy (verified owner) –

    *****

  19. Robert (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  20. Ryan (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  21. Nicholas (verified owner) –

    Very fast delivery.

  22. Jesse (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  23. John (verified owner) –

    Great description on the page, easy to understand what I was buying.

  24. Jose (verified owner) –

    5 Stars!!

  25. Patrick (verified owner) –

    Value for money, super satisfied.

  26. Jason (verified owner) –

    Very good customer service, super friendly.

  27. Nicholas (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  28. Edward (verified owner) –

    Very good customer service, super friendly.

  29. Mark (verified owner) –

    Just what I needed.

  30. Thomas (verified owner) –

    Very good customer service, super friendly.

  31. Gregory (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  32. Thomas (verified owner) –

    I received it really fast.

  33. Timothy (verified owner) –

    I received it really fast.

  34. Timothy (verified owner) –

    5 Stars!!

  35. Jonathan (verified owner) –

    Just what I needed.

Add a review

Related products

  • Sale!
    • Dobinsons Twin Tube Struts in black paint
    • Dobinsons GS59-221 struts installed on a Tacoma
    Dobinsons
    On Sale All November!!

    Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
    • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
    • Superior Design, thicker walls, longer travel
    • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
    • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
    • Matched to compliment Dobinsons Complete Suspension Systems
    • Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
    • Offered in Yellow or Black
    (6 reviews)
    Original price was: $350.00.Current price is: $297.50. Select options
  • Sale!
    Dobinsons Diff Drop Kit for Toyotas DD59-527K
    On Backorder
    • Dobinsons Diff Drop Kit for Toyotas DD59-527K
    • Dobinsons DD59-527K diff drop kit installed on Toyota 4runner Tacoma FJ Cruiser GX470 GX460
    Dobinsons
    On Sale All November!!
    ETA is early JAN 2025

    Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
    • Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
    • Keeps CV angles at a good working angle
    • Suitable for lifts over 2.0″.  There’s really no benefit to adding them if there’s less lift than 2.0″
    • Includes all necessary hardware, including machined spacers and nuts/bolts
    • Includes 2 different lengths of the long bolts as some vehicles need them longer than others
    • Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
    • Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
    • Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
    • Installation Instructions
    (17 reviews)
    Original price was: $60.00.Current price is: $51.00. Add to cart
  • Sale! Dobinsons variable rate rear coil springs pair
    • Dobinsons variable rate rear coil springs pair
    • Dobinsons C59-701V installed
    Dobinsons
    On Sale All November!!

    Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 470mm free height, 16mm wire diameter, 157-230LBF/IN  variable spring rate
    (15 reviews)
    Original price was: $305.00.Current price is: $259.25. Select options
  • Sale! Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    Dobinsons
    On Sale All November!!

    Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
    • Order 1 for 1 vehicle
    • Heavy Duty, zinc plated, with high quality ball joint ends for long life
    • Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
    • Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
    • Adjustable to suit lift heights of 2″ to 4″
    • Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
    • Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video.  Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
    (15 reviews)
    Original price was: $200.00.Current price is: $170.00. Add to cart