Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
ARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
- For Use With Toyota 12 Bolt Semi Float 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75Â Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,113.95
In StockDescription
ARB RD153 Rear Air Locker
GTIN: 00881348012289
ARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float is made for a wide variety of Toyota vehicles that use the 12 Bolt Semi Float 30 Spline differential (solid axle).
The ARB Toyota 12 Bolt Semi Float 30 Spline Air Locker RD153 for your 30 spline axle for all gear ratios, can instantly lock differentials and allow you to tackle the toughest off-road terrain. The world’s best traction aid, ARB Air Lockers keep you moving in all conditions.
Air Lockers from ARB are currently available in over 100 configurations to suit a wide range of off-road and 4×4 vehicles from around the world. Because the air locker is only engaged when needed, it can be installed in BOTH the front and rear axles, with separate switches independently controlling the RD153 air locker from within the off-road truck or vehicle.
Installation of the ARB RD153 air locker should be performed by a qualified differential technician, although no special tools or skills are required apart from those necessary for fitting a standard differential. When installed with an ARB air compressor (high output or mini), the ARB RD153 – Toyota 12 Bolt Semi Float 30 Spline locker system is supplied as a complete kit which contains all of the parts necessary for proper installation, including industrial grade control switches, air lines and fittings. ARB offers two compressor models suitable for Air Locker operation (high output air compressor or mini air compressor). A dedicated air activation system is available which is extremely durable and compact. Alternatively a larger compressor can be specified, which is also perfect for inflating tires, air mattresses and a host of other applications where compressed air is required.
ARB RD153 Vehicle Fitment – All gear ratios
Toyota Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75Â Series REAR 1969 to 1992 SEMI FLOAT models (additional bearings may be required)
**Late model 50.0mm ID carrier bearings (eg. from an 80 series) must be used to suit the larger bearing journal the Air Locker uses. This will also improve bearing life
Additional information
| Weight | 30 lbs |
|---|
12 reviews for ARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Rear 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450, LX470 and 100 Series
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(2 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Rear Brake Proportioning Valve Extension (LSPV) for 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Adjusts rear automatic LSPV brake adjuster to proper height, based on lift amount
- If you lift your car and don’t adjust the LSPV, your rear brakes essentially will not apply any pressure, and the fronts will wear through extremely fast
- Zinc plated, gold color, comes with hardware and instructions
- Heavy duty steel, will outlast your vehicle
- Suitable for 0-6″ of Lift, multiple levels of adjustment
- Necessary on any lift over 2.0″ on a 80 Series
(0 reviews) -
Accessories
Dobinsons 80 Series Drawers for Toyota Land Cruiser 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(11 reviews)
Travis (verified owner) –
Good quality, really nice.
Stephen (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jesse (verified owner) –
This is my go-to now for off road parts.
Thomas (verified owner) –
It’s exactly what I wanted.
David (verified owner) –
Great description on the page, easy to understand what I was buying.
Matthew (verified owner) –
Very fast delivery.
Robert (verified owner) –
Great description on the page, easy to understand what I was buying.
Jonathan (verified owner) –
This is my go-to now for off road parts.
Christopher (verified owner) –
Would definitely buy from this site again.
Nicholas (verified owner) –
I received it really fast.
Kevin (verified owner) –
Very fast delivery.
Timothy (verified owner) –
Just what I needed.