You may be interested in…
-
FirestoneFREE SHIPPING
within 48 US StatesFirestone 2900 Air Command Air Compressor System
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Light Duty Compressor Specs (100 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
- Electric analog gauge and a single toggle switch (includes housing for easy installation).
- Plug and play wiring harness.
- 30ft of 1/4″ tubing. All required hardware for installation.
- No-Drill Mounting Plate
- Limited 2 Year Warranty
- Dash Panel Style: Controls Two Air Springs Simultaneously
- Type: Heavy Duty
- Maximum Pressure (PSI): 100 Pounds Per Square Inch
- Operation Type: Switch Operated
- Estimated Install Time (Hours): 2
- Installation Manual
(0 reviews) -
SamuraiFREE SHIPPING
within 48 US StatesSuzuki Samurai 6.5:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1)
- Includes four new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Upgraded Trail-Safe seals included at no additional cost
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 chromoly alloy steel for its great strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Installation Instructions
- Special Seal Instructions
(9 reviews) -
Samurai
Suzuki Samurai Updated Transfer Case Front Output Shaft w/Pilot Bearing
- Suits 1986 to 1995 Suzuki Samurai
- Repeated popping of the front output shaft gear will result in gear failure and loss of power to the front axle
- In 1994 Suzuki upgraded the output shaft to a heavier duty version and stopped using the older style shaft that was prone to failure
- These later style shafts are a drop-in replacement for 1986-1993 transfer cases
- The front output gear can be installed without fully disassembling the transfer case
- Only the front output cover needs to be removed for installation
- Install the updated gear now and keep the older gear in your tool box as a trail spare
- NOTE: Includes high-quality output shaft pilot bearing
(9 reviews)
Cart totals
Subtotal | $2,450.47 |
---|---|
Shipping |
Shipping to FL. |
Route Shipping Protection | $61.26 |
Tax | $186.42 |
Total | $2,733.15 |