Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
Original price was: $575.00.$488.75Current price is: $488.75.
In Stock
SKU: UCA59-006
Categories: 100 Series Land Cruiser IFS (1998-2007), Control Arms, Control Arms - 100 Series, Dobinsons, LX470, Suspension, Upper Control Arms
Tags: 100 series, UCA, UCA59, uca59-006K
Brand: Dobinsons Spring & Suspension
Description
Dobinsons 100 Series UCAs – front upper control arm set. These will fit Toyota Land Cruiser 100 Series 1998 to 2007 and Lexus LX470 1998 to 2007. NOTE: This does not include any ball joints.
These Dobinsons 100 Series UCAs will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary depending what ball joints you use.
- Complete kit for both left and right hand side, includes OE style rubber frame bushings (installed), ball joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Replacement Ball Joints can be ordered here
For many years now, many people have been asking to add additional lift to the front of their 100 series with only limited companies offering the correct combination of parts to make that happen. Dobinsons is now offering front 100 series UCA’s as well as a proper front diff drop kit for it so that a lift of 2″, 2.5″ or 3″ can now be achieved while maintaining proper wheel alignment and caster correction. With these UCA’s correcting the caster and setting the ball joint at a proper angle (not stressed) the front IFS in the 100 series can finally ride correctly while yielding more front lift and necessary ground clearance. The diff drop kit is available here: https://exitoffroad.com/product/dobinsons-dd59-532k-diff-drop-kit-100-series-and-lx470/
Vehicle Suitability:
1998 Toyota Land Cruiser 100 Series
1999 Toyota Land Cruiser 100 Series
2000 Toyota Land Cruiser 100 Series
2001 Toyota Land Cruiser 100 Series
2002 Toyota Land Cruiser 100 Series
2003 Toyota Land Cruiser 100 Series
2004 Toyota Land Cruiser 100 Series
2005 Toyota Land Cruiser 100 Series
2006 Toyota Land Cruiser 100 Series
2007 Toyota Land Cruiser 100 Series
1998 Lexus LX470
1999 Lexus LX470
2000 Lexus LX470
2001 Lexus LX470
2002 Lexus LX470
2003 Lexus LX470
2004 Lexus LX470
2005 Lexus LX470
2006 Lexus LX470
2007 Lexus LX470
2008 Lexus LX470
8 reviews for Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 – No Ball Joints
You must be logged in to post a review.
Related products
-
Sale!DobinsonsOn Sale All November!!
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
(14 reviews)Original price was: $270.00.$229.50Current price is: $229.50. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews)
Jeremy (verified owner) –
*****
Nathan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Bryan (verified owner) –
*****
Matthew (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Mark (verified owner) –
Good quality, really nice.
Jose (verified owner) –
Very fast delivery.
Scott (verified owner) –
Just what I needed.
Edward (verified owner) –
Just what I needed.