You may be interested in…
-
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 2DR Ford Bronco – 883-06-192
- Suits: Front – Ford Bronco (fullsize) 2021+ 2-Door Models
- Lift Height: 2-3″ with Sasquatch package, 3.5-4.5″ without Sasquatch package
- Requires Aftermarket UCA’s for coilover clearance and articulation
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 23.720″
- Compressed: 17.940″
- Travel: 5.780″
- Top Mount: OEM
- Bottom Mount: Bar Pin
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart -
Montero NM NP NS NT 2000+
Dobinsons SC43-008 Pair of Strut Top Plates for Mitsubishi Montero 2000+
- Suits Mitsubishi Montero NM NP NS NT 2000+ Wagons
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- 2 Required per vehicle, sold as pairs
- Photo is for illustration purposes only
$120.00 Add to cart -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 4DR Ford Bronco – 883-06-195
- Suits: Front – Ford Bronco (fullsize) 2021+ 4-Door Models
- Lift Height: 2-3″ with Sasquatch package, 3-4″ without Sasquatch package
- Requires Aftermarket UCA’s for coilover clearance and articulation
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 23.720″
- Compressed: 17.940″
- Travel: 5.780″
- Top Mount: OEM
- Bottom Mount: Bar Pin
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
Dobinsons
Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
$120.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60710 IFP Front Struts for Toyota Tundra and Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
$720.00 Add to cart -
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons Tubular UCA Kit | Tacoma Hilux Fortuner 2005-23
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
$795.00 Add to cart -
Ranger 2019+ (US Spec)Ships FREE !!
within 48 US StatesDobinsons IMS Monotube IFP Rear Shocks | Ford Ranger USA Model 2019-2023
- For Ford Ranger 2019-2023 USA spec, for 0-2.5″ of rear lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 638mm extended, 415mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart
Cart totals
Subtotal | $28,717.95 |
---|---|
Shipping |
Shipping to FL. |
Tax | $2,153.88 |
Total | $31,286.83 |