Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons Tubular UCA Pair | Land Cruiser 200 Series + Lexus LX570
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
$795.00
In Stock
EAN: 9332670061274
SKU: UCA59-001K
Categories: 200 Series Land Cruiser (2008-2021), 200 Series Land Cruiser ARMORED, Control Arms, Control Arms - 200 Series, Dobinsons, Exceptions, Suspension, Upper Control Arms
Tags: UCA, UCA59, UCA59-001K
Brand: Dobinsons Spring & Suspension
Description
Dobinsons 200 Series UCAs – front upper control arm set. This will ONLY work on a vehicle lifted 1.5″ or more, due to the built-in 3 degrees of caster. These will fit Toyota Land Cruiser 200 Series 2008 to 2021 and Lexus LX570 2008 to 2021.
For installation instructions of these Dobinsons 200 Series UCA’s, click this link here:Â https://exitoffroad.com/wp-content/uploads/2020/01/UCA59-001K-Install-Instructions.pdf
These Dobinsons 200 Series UCAs will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.
- Complete kit for both left and right hand side, includes new ball joints pressed in, OE style rubber frame bushings (installed), and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Replacement Ball Joints can be ordered here
Vehicle Fitment:
2008 Toyota Land Cruiser 200 Series
2009 Toyota Land Cruiser 200 Series
2010 Toyota Land Cruiser 200 Series
2011 Toyota Land Cruiser 200 Series
2012 Toyota Land Cruiser 200 Series
2013 Toyota Land Cruiser 200 Series
2014 Toyota Land Cruiser 200 Series
2015 Toyota Land Cruiser 200 Series
2016 Toyota Land Cruiser 200 Series
2017 Toyota Land Cruiser 200 Series
2018 Toyota Land Cruiser 200 Series
2019 Toyota Land Cruiser 200 Series
2020 Toyota Land Cruiser 200 Series
2021 Toyota Land Cruiser 200 Series
2008 Lexus LX570
2009 Lexus LX570
2010 Lexus LX570
2011 Lexus LX570
2012 Lexus LX570
2013 Lexus LX570
2014 Lexus LX570
2015 Lexus LX570
2016 Lexus LX570
2017 Lexus LX570
2018 Lexus LX570
2019 Lexus LX570
2020 Lexus LX570
2021 Lexus LX570
8 reviews for Dobinsons Tubular UCA Pair | Land Cruiser 200 Series + Lexus LX570
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews)
Patrick (verified owner) –
Good quality, really nice.
Christopher (verified owner) –
Just what I needed.
Patrick (verified owner) –
Great description on the page, easy to understand what I was buying.
Jose (verified owner) –
*****
Nicholas (verified owner) –
Great description on the page, easy to understand what I was buying.
Thomas (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
James (verified owner) –
Very fast delivery.
Mark (verified owner) –
This is my go-to now for off road parts.