Your cart is currently empty!
within 48 US States
Dobinsons IMS45-50642 Front 2.2″ IFP Struts Pair | Frontier Xterra R51 Pathfinder (0-2.5″)
- IMS front struts for 0-2.5″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specs: 385mm extended, 266mm compressed
- Full 2 year limited warranty, no set rebuild time period
$650.00
In StockDescription
Pair of front Dobinsons IMS45-50642 Internal Reservoir Monotube adjustable height struts (does not include coils or top mounts) for the following vehicles:
Nissan Frontier and Navara D40 Models
Nissan Frontier D41 2022+ Models
Nissan Xterra (2005-2015)
Nissan Pathfinder R51 models
These have an adjustable lower coil seat to fine tune lift height or any lean in the vehicle. These do not come with coil springs or top mounts. They do come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Vehicle Fitment:
2005 Nissan Frontier
2006 Nissan Frontier
2007 Nissan Frontier
2008 Nissan Frontier
2009 Nissan Frontier
2010 Nissan Frontier
2011 Nissan Frontier
2012 Nissan Frontier
2013 Nissan Frontier
2014 Nissan Frontier
2015 Nissan Frontier
2016 Nissan Frontier
2017 Nissan Frontier
2018 Nissan Frontier
2019 Nissan Frontier
2020 Nissan Frontier
2021 Nissan Frontier
2022 Nissan Frontier
2023 Nissan Frontier
2024 Nissan Frontier
2005 Nissan Navara D40
2006 Nissan Navara D40
2007 Nissan Navara D40
2008 Nissan Navara D40
2009 Nissan Navara D40
2010 Nissan Navara D40
2011 Nissan Navara D40
2012 Nissan Navara D40
2013 Nissan Navara D40
2014 Nissan Navara D40
2015 Nissan Navara D40
2016 Nissan Navara D40
2017 Nissan Navara D40
2018 Nissan Navara D40
2019 Nissan Navara D40
2020 Nissan Navara D40
2016 Nissan NP300
2017 Nissan NP300
2018 Nissan NP300
2019 Nissan NP300
2020 Nissan NP300
2021 Nissan NP300
2022 Nissan NP300
2023 Nissan NP300
2024 Nissan NP300
2005 Nissan Xterra
2006 Nissan Xterra
2007 Nissan Xterra
2008 Nissan Xterra
2009 Nissan Xterra
2010 Nissan Xterra
2011 Nissan Xterra
2012 Nissan Xterra
2013 Nissan Xterra
2014 Nissan Xterra
2015 Nissan Xterra
2005 Nissan Pathfinder R51
2006 Nissan Pathfinder R51
2007 Nissan Pathfinder R51
2008 Nissan Pathfinder R51
2009 Nissan Pathfinder R51
2010 Nissan Pathfinder R51
2011 Nissan Pathfinder R51
2012 Nissan Pathfinder R51
16 reviews for Dobinsons IMS45-50642 Front 2.2″ IFP Struts Pair | Frontier Xterra R51 Pathfinder (0-2.5″)
You must be logged in to post a review.
You may also like…
-
Upper Control Arms
Dobinsons Billet Aluminum UCA’s Pair | Nissan Frontier Xterra Pathfinder
- Super strong billet aluminum front upper control arms (UCA’s) for Nissan D40 and D41 platforms
- Suits 2005-2021 Nissan Frontier, 2022-Present Nissan Frontier, 2005-2015 Nissan Xterra, 2005-2012 Nissan Pathfinder R51
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Includes detailed instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(6 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons MRA45-A642 3-Way Adjustable Struts Pair | Xterra Frontier Pathfinder R51
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Height adjustable with a fully threaded body
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Due to the Restricted Suspension Geometry, a Maximum of 40mm Lift is Achievable in the Front of this Vehicle.
- 395mm extended, 266mm compressed
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
(13 reviews)
Jacob (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Nathan (verified owner) –
This is my go-to now for off road parts.
Eric (verified owner) –
Would definitely buy from this site again.
John (verified owner) –
Very fast delivery.
Robert (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Michael (verified owner) –
I received it really fast.
Daniel (verified owner) –
I received it really fast.
Robert (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Nathan (verified owner) –
Great description on the page, easy to understand what I was buying.
Robert (verified owner) –
5 Stars!!
John (verified owner) –
5 Stars!!
Jacob (verified owner) –
This is my go-to now for off road parts.
Timothy (verified owner) –
It’s exactly what I wanted.
Jesse (verified owner) –
Would definitely buy from this site again.
Jason (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Ryan (verified owner) –
5 Stars!!