Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons IMS21-50472 2.2″ Monotube Extended Travel Struts Pair
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+
- For 3.0″ of lift
- Requires UCA ball joint spacer kit and a diff drop kit for proper movement and travel
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – should be set to 195mm
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
$650.00
In StockDescription
Dobinsons IMS21-50472 front struts for the Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020+.
Dobinsons IMS21-50472 suitable for 3.0″ of lift. These can only be used with lifted aftermarket coils. Since your vehicle is pretty old now, you could use these struts with the original coils, but more than likely those stock coils that are so old now probably have sagged out pretty bad and aren’t holding up the weight of the vehicle properly. By adding a new pair of Dobinsons coils to these new struts, as well as new strut top plates/mounts, you’ll be setting up the front end properly and bringing the ride height and ride quality back up to where it is supposed to be.
To see all products that Exit Offroad offers for the D-Max, click on this link here: https://exitoffroad.com/product-category/isuzu/d-max-2012-2020/
Dobinsons IMS21-50472 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
Vehicle Fitment:
2012 Isuzu D-Max
2013 Isuzu D-Max
2014 Isuzu D-Max
2015 Isuzu D-Max
2016 Isuzu D-Max
2017 Isuzu D-Max
2018 Isuzu D-Max
2019 Isuzu D-Max
2020 Isuzu D-Max
2021 Isuzu D-Max
2022 Isuzu D-Max
2023 Isuzu D-Max
2024 Isuzu D-Max
2020 Mazda BT-50
2021 Mazda BT-50
2022 Mazda BT-50
2023 Mazda BT-50
2024 Mazda BT-50
7 reviews for Dobinsons IMS21-50472 2.2″ Monotube Extended Travel Struts Pair
You must be logged in to post a review.
You may also like…
-
DobinsonsDobinsons SC59-002 Pair of Strut Top Plates
- Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Also suits 2012-2024 Isuzu D-Max and 2020+ Mazda BT-50
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Photo is of actual product and parts included
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Assembly Instructions
(9 reviews)
Related products
-
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-711 Pair of Rear Shocks for Toyota Tundra 2007-2021
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-711 Specifications are 622mm extended, 380mm compressed, 54mm body size
(6 reviews) -
KL Cherokee (2014-2022) (Trailhawk)FREE SHIPPING
within 48 US StatesDobinsons GS29-431B Rear Shocks Pair | Jeep Cherokee KL 2014 to 2022 Sport, Latitude and Trailhawk
- Vehicle Fitment: Jeep Cherokee KL Sport, Latitude and Trailhawk
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- These shocks are painted BLACK
- Dobinsons GS29-431 Specifications: 718mm extended, 534mm compressed, 45mm body size
(6 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons GS59-574 Pair Extended Travel Struts FJ Cruiser 4Runner GX460 2010-2024
- Suits Toyota FJ Cruiser 2010+ and Toyota 4Runner 5th Gen 2010-2024, and Lexus GX460 (all years) for 2.0″ to 3.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-574 Specifications: Extended Travel – 575mm extended, 430mm compressed, 54mm body size
- Dobinsons GS59-574 struts add 1″ to the listed coil spring that are used with them, due to the raised coil seat. They are also longer than stock for taller lifts
- Example: Use a 2″ lift spring with these struts to get 3″ of lift
(6 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons GS59-637 Pair of Twin Tube Shocks for Toyota 4×4’s
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-637 Specifications: 581mm extended, 349mm compressed, 50mm body size
(6 reviews)
Joshua (verified owner) –
Good quality, really nice.
Andrew (verified owner) –
It’s exactly what I wanted.
Brian (verified owner) –
Just what I needed.
Jeremy (verified owner) –
Very good customer service, super friendly.
Mark (verified owner) –
Great description on the page, easy to understand what I was buying.
Anthony (verified owner) –
Very fast delivery.
Benjamin (verified owner) –
5 Stars!!