Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons IMS29-50732 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2011-2015
- Fits Jeep Grand Cherokee WK2 from 2011 to 2015 – will not fit 2016+ as they use a different lower mount
- Does not suit Quadralift vehicles (air ride suspension)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- ****Coil seat should be set at 540mm(21.25″) from the strut bushing eye. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
- Struts only, sold as a pair – the coils are sold separately
$770.00
In Stock
EAN: 9332670066996
SKU: IMS29-50732
Categories: Dobinsons, Exceptions, IMS Monotube, Struts and Shocks, Suspension, WK2 Grand Cherokee (2011-2022)
Brand: Dobinsons Spring & Suspension
Description
Pair of front Dobinsons IMS29-50732 Internal Reservoir Monotube adjustable height struts (does not include coils or top mounts) – Fits Jeep Grand Cherokee WK2 from 2011-2015.
- Does not suit Quadralift vehicles (air ride suspension)
These have an adjustable lower coil seat to fine tune lift height or any lean in the vehicle. These do not come with coil springs or top mounts. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Link to Youtube video: https://youtu.be/Npfx40VD3kM
Link to shop for suitable front coils: https://exitoffroad.com/product-category/suspension/coil-springs/
Dobinsons IMS Monotube IMS29-50732 Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilizing the Monotube design, Dobinsons Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Vehicle Fitment:
2011 Jeep Grand Cherokee Front Struts
2012 Jeep Grand Cherokee Front Struts
2013 Jeep Grand Cherokee Front Struts
2014 Jeep Grand Cherokee Front Struts
2015 Jeep Grand Cherokee Front Struts
15 reviews for Dobinsons IMS29-50732 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2011-2015
You must be logged in to post a review.
You may also like…
-
WK2 Grand Cherokee (2011-2022)FREE SHIPPING
within 48 US StatesDobinsons IMS Lift Kit for Jeep Grand Cherokee WK2 for 2011-2022
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- 50mm hi-flow CNC 6061 Billet alloy piston
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Not all coil options are black. Some may be supplied in teal
- To check if your WK2 has Nivomat rear shocks measure the original shock diameter.
Standard – 51mm
Nivomat – 63mm - Vehicles with Nivomat rear shocks are not compatible with our rear shocks (IMS29-50733), In order to achieve proper fitment, these OE Jeep part numbers below are required that you will have to buy from Jeep
- Shock mount plate P/# 5181844AA
- Shock mount P/# 68029590AE
- Bumper jounce P/# 68029591AC
(8 reviews)
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
Dobinsons
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
(14 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews)
Jesse (verified owner) –
It’s exactly what I wanted.
Robert (verified owner) –
I received it really fast.
Brian (verified owner) –
This is my go-to now for off road parts.
Edward (verified owner) –
5 Stars!!
Sean (verified owner) –
This is my go-to now for off road parts.
Paul (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Andrew (verified owner) –
Would definitely buy from this site again.
Justin (verified owner) –
Very fast delivery.
Richard (verified owner) –
Great description on the page, easy to understand what I was buying.
Patrick (verified owner) –
5 Stars!!
John (verified owner) –
I received it really fast.
Ryan (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Aaron (verified owner) –
Good quality, really nice.
Jonathan (verified owner) –
Just what I needed.
Bryan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.