You may be interested in…

• 

  • 
  • 
  • 

  Upper Control Arms

  FREE SHIPPING
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s Pair | Tacoma Hilux Fortuner 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side, fully assembled with ball joints pressed in
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Replacement Ball Joints can be ordered Here

  Rated 5.00 out of 5

  (9 reviews)

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks Pair | 80 Series 6″ Lift + Tundra

  • Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 6″ of lift, and 2022-2025+ Toyota Tundra with Long travel rear suspension
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 22mm / 7/8″ shaft diameter
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 714mm extended, 440mm compressed
  • Installation Instructions of the MRA Shocks
  • Bump stop extensions and longer brake lines must be run with these longer shocks

  Rated 5.00 out of 5

  (19 reviews)

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Shocks - 80 Series

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-60689 Front IMS 2.6″ Shocks Pair | 80 Series 1990-1997 – 31″ Extended

  • 31″ long 2.6″ body shocks for the front of a Toyota Land Cruiser 80 Series or Lexus LX450
  • For custom use, extreme front long travel shocks, longer than the Dobinsons 6″ lift shocks
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 790mm (31.1″) extended, 467mm (18.4″) compressed
  • Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
  • Includes rubber shock boots to protect the shock shafts
  • Photo for illustration purposes

  Rated 5.00 out of 5

  (8 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-60685 Rear 2.6″ IFP Shocks Pair | 80 Series (6″ lift) + Tundra

  • Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97 with 6″ of Lift or for Long Travel use and 2022-2025+ Toyota Tundra for Long Travel
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 730mm extended, 446mm compressed
  • Bump stop extensions and longer brake lines must be run with these longer shocks
  • Sold in Pairs

  Rated 5.00 out of 5

  (12 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks Pair | 80 Series 6″ Lift

  • Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 6″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 22mm / 7/8″ shaft diameter
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Installation Instructions of the MRA Shocks
  • 728mm extended, 432mm compressed
  • Bump stop extensions and longer brake lines must be run with these longer shocks
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (20 reviews)

  $1,350.00 Add to cart
• 

  Dobinsons

  Dobinsons Greasable Bolt Pair | SP59-060

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Kit includes 2 greasable bolts, as shown in the photo
  • Order 2 kits if you want to replace fixed and shackle end bolts
  • Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+.  See full vehicle list below
  • 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end

  Rated 5.00 out of 5

  (12 reviews)

  $60.00 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  Rated 5.00 out of 5

  (4 reviews)

  $69.00 Add to cart