Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons Land Cruiser 200 Series Snorkel Kit for 2008-2015
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2008-2015 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
$355.00
In Stock
EAN: 9332670047353
SKU: SN59-3356
Categories: 200 Series Land Cruiser (2008-2021), 200 Series Land Cruiser ARMORED, Accessories, Dobinsons, Exceptions, Performance Upgrades - 200 Series, Snorkel
Tag: sn59-3356
Brand: Dobinsons Spring & Suspension
Description
Dobinsons 200 Series Snorkel Kits offer a high quality Raised Air Intake System at a competitive price, offering a great solution to provide cleaner air to the vehicle’s engine. Grab a Land Cruiser 200 Series Snorkel Kit today and raise up your air intake to deliver cleaner and cooler air than a factory intake. Dust has mass, so the higher up you go with the air intake, the less dust will be mixed in the air. When in a vehicle convoy on dusty and dirty roads, it’s important to keep a good gap from the vehicles in front of you to reduce the amount of dust that goes into your intake, and by adding a 200 Series Snorkel Kit, you’ll be sure to keep the intake cleaner and keep your air filter in better condition for longer.
SN59-3356 Land Cruiser 200 Series Snorkel Kit is designed specifically for the body and OEM air intake of the 2008-2015 Toyota Land Cruiser 200 Series, suitable for all engines offered, diesel or gas/petrol.
Not a direct bolt-on for the Lexus LX570 as they have a different fender profile, so custom fitting will be necessary.
Rotationally molded using precision CNC shaped aluminum dies, this ensures proper vehicle fitment every time using the supplied instructions. This snorkel kit increases the air intake height to allow safer water crossings and reduce the dust intake, and after following the installation instructions carefully, your snorkel kit could seal out excess dust and moisture from your air cleaner. The Increased air intake height rams cooler, cleaner air into the engine increasing engine performance due to a cleaner air filter with more free flowing air. Manufactured from high quality UV resistant LLDPE, this type of material is incredibly durable, maintaining its’ shape and finish for years to come. All Snorkel Kits include installation template and all mounting hardware required, and a listing of tools required. This kit does not provide any specialty tools for the installation.
Note: Fitment to any vehicle and engine not matching this description is not recommended by Dobinsons and is not covered by our return or warranty policy.
Dobinsons Snorkel Kits are available for Ford Ranger, Isuzu D-Max, Holden Rodeo, Mitsubishi Triton/L200, Mitsubishi Delica, GQ/Y60 and GU/Y61 Nissan Patrol, D40 Nissan Navara, 71, 73, 74, 75, 78, 80, 100, 105, and 200 Series Toyota Land Cruiser, 90, 120, and 150 Series Toyota Prado, and Toyota Hilux/Vigo.
Vehicle Fitment:
2008 Toyota Land Cruiser Snorkel
2009 Toyota Land Cruiser Snorkel
2010 Toyota Land Cruiser Snorkel
2011 Toyota Land Cruiser Snorkel
2012 Toyota Land Cruiser Snorkel
2013 Toyota Land Cruiser Snorkel
2014 Toyota Land Cruiser Snorkel
2015 Toyota Land Cruiser Snorkel
6 reviews for Dobinsons Land Cruiser 200 Series Snorkel Kit for 2008-2015
You must be logged in to post a review.
Related products
-
200 Series Land Cruiser (2008-2021)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 200 250 300
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+, and Toyota Land Cruiser 300 Series 2022+, and 2024+ Toyota Land Cruiser 250 Series
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(5 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(4 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60688 2.6″ IFP Front Struts Pair | Land Cruiser 200 Series
- Front struts only (no coils). For a full suspension, click here
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- 606mm extended, 438mm compressed
- SOLD IN PAIRS
(15 reviews)
Nathan (verified owner) –
Very fast delivery.
Adam (verified owner) –
This is my go-to now for off road parts.
Christopher (verified owner) –
This is my go-to now for off road parts.
John (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Gregory (verified owner) –
Would definitely buy from this site again.
Andrew (verified owner) –
Good quality, really nice.