Your cart is currently empty!
within 48 US States
Dobinsons 3-Way Adjustable MRR Sequoia Lift Kit | 2023-2024+ (3-4″)
- Suits 2023-2024+ Toyota Sequoia 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- A 2023+ Sequoia came with a front ride height 1″ lower than a 2022+ Tundra, so we’re able to offer a 4″ lift on these, which is a 3″ on a Tundra, and still within the limits of the IFS
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Does not suit air suspension equipped models
- Coil seat for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye
- 3″+ of front lift requires new aftermarket UCA’s for proper alignment and clearance
- If doing a 4″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Front Installation Instructions
Original price was: $3,335.00.$2,834.75Current price is: $2,834.75.
In StockChoose which coils match the lift height you want with the added weight you have on the car. Stock weight or 110-220LBS of added constant weight (bumper, winch, etc)
TRD Pro models yield 1" less lift than listed below, since they come lifted already from the factory
C59-834 - 3" lift with 0-110lbs added front end weight
C59-836 - 3" lift with 110-220lbs added front end weight
C59-838 - 4" lift with 0-110lbs added front end weight
C59-840 - 4" lift with 110-220lbs added front end weight
TRD Pro models yield 1" less lift than listed below, since they come lifted already from the factory
C59-817V - Stock height with stock weight
C59-819V - 1" Lift with stock weight
C59-821V - 2" Lift with stock weight, 1" Lift with 220-440lbs added weight
C59-823V - 2" Lift with 220-440lbs added weight, 1" Lift with 600-800lb added weight
C59-851V - 3" Lift with stock weight, 2" Lift on a stock weight TRD PRO
C59-853V - 3" Lift with 440LBS added weight, 2" Lift with 220-440lbs on a TRD PRO
Description
Dobinsons MRR 3-Way Adjustable Sequoia Lift Kit, Dobinsons offer this complete 3.0″ to 4.0″ suspension system for the 2023+ 4×4 models looking to freshen up their suspension as well as add ground clearance. This does not suit vehicles that come with factory Airbag suspension.
For an itemized list of all Dobinsons 2023 Sequoia products, click here: https://exitoffroad.com/product-category/toyota/sequoia/sequoia-3rd-gen/
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
Built on the back of the race winning Monotube Remote Reservoir (MRR) shock absorbers, Dobinsons new range of MRR Adjustable shock absorbers combine the best in high performance race-bred Monotube technology, with an all new 3-way damping adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
The new 6063 honed aluminum reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
The Micro-polished, hard chromed and heat treated shock shaft, revised CNC aluminum high flow race piston, and DOM Seamless tubing body provides the ultimate in performance and off-road durability. The 3-way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable. Enjoy the ride…
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All Dobinsonsâ„¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
**Photo for illustration purposes only
2023 Toyota Sequoia Lift Kit
2024 Toyota Sequoia Lift Kit
2025 Toyota Sequoia Lift Kit
9 reviews for Dobinsons 3-Way Adjustable MRR Sequoia Lift Kit | 2023-2024+ (3-4″)
You must be logged in to post a review.
You may also like…
-
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews)
Charles (verified owner) –
5 Stars!!
William (verified owner) –
This is my go-to now for off road parts.
Benjamin (verified owner) –
5 Stars!!
Eric (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
John (verified owner) –
5 Stars!!
Mark (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Anthony (verified owner) –
Good quality, really nice.
Thomas (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Christopher (verified owner) –
5 Stars!!