Your cart is currently empty!
Dobinsons TB43-200 Torsion Bar Pair for Mitsubishi
- Suits the following vehicles:
- Mitsubishi Montero/Pajero NA – NF 4 Cyl (1983 to 1991)
- Mitsubishi Montero/Pajero NH, NJ 4 Cyl (1991 to 1994)
- Mitsubishi Montero/Pajero NF – NG V6 (1988 to 1991)
- Mitsubishi Montero/Pajero 1991-1994 V6 models
- Mitsubishi Triton L200 1987-1991
- TB43-200 measure 1282 mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
$325.00
In StockDescription
Dobinsons TB43-200 Torsion bar set measures 1282mm in total length is suitable for the following vehicles:
- Mitsubishi Montero/Pajero NA – NF 4 Cyl (1983 to 1991)
- Mitsubishi Montero/Pajero NH, NJ 4 Cyl (1991 to 1994)
- Mitsubishi Montero/Pajero NF – NG V6 (1988 to 1991)
- Mitsubishi Montero/Pajero 1991-1994 V6 models
- Mitsubishi Triton L200 1987-1991
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons TB43-200 torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons TB43-200 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATEÂ
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Vehicle Suitability:
1983 Mitsubishi Montero Pajero
1984 Mitsubishi Montero Pajero
1985 Mitsubishi Montero Pajero
1986 Mitsubishi Montero Pajero
1987 Mitsubishi Montero Pajero
1988 Mitsubishi Montero Pajero
1989 Mitsubishi Montero Pajero
1990 Mitsubishi Montero Pajero
1991 Mitsubishi Montero Pajero
1992 Mitsubishi Montero Pajero
1993 Mitsubishi Montero Pajero
1994 Mitsubishi Montero Pajero
1987 Mitsubishi Triton L200
1988 Mitsubishi Triton L200
1989 Mitsubishi Triton L200
1990 Mitsubishi Triton L200
1991 Mitsubishi Triton L200
4 reviews for Dobinsons TB43-200 Torsion Bar Pair for Mitsubishi
You must be logged in to post a review.
Related products
-
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Pickup Trucks
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
Rated 5.00 out of 5(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
Rated 5.00 out of 5(13 reviews) -
Dobinsons
Dobinsons Front 30mm Coil Spacer (Single)
- Suits:
- Land Cruiser 80 Series and Lexus LX450
- Range Rover 1971-1988
- Land Rover Discovery Series I 1991-1999
- Defender 90 1984-1990
- Defender 110 1984-1992
- Defender 110 + 130 1992-2001
- Defender 110 + 130 2007-2019
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
Rated 5.00 out of 5(4 reviews) - Suits:
-
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
Rated 5.00 out of 5(14 reviews)
Edward (verified owner) –
This is my go-to now for off road parts.
Timothy (verified owner) –
5 Stars!!
Jeffrey (verified owner) –
5 Stars!!
Travis (verified owner) –
Very fast delivery.