Your cart is currently empty!
Icon 55156 Diff Drop Kit | 22+ Tundra, 23+ Sequoia, 24+ GX550
Rated 5.00 out of 5 based on 8 customer ratings
(8 customer reviews)
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia and 2024+ Lexus GX550
- Keeps CV angles at a good working angle when lifted
- Reduces CV bind at full droop, especially when used with extended travel struts or coilovers
- Drops front differential to provide better maximum operating angle for CV joints
- CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
- Polyurethane bushings limit deflection and prevent differential movement under load
- 100% Bolt-on with no cutting or welding necessary for installation
- Installation Guide
$252.95
In StockDescription
From ICON Vehicle Dynamics, the Icon Front Diff Drop Kit for the 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia, and the 2024-2025+ Lexus GX550 lowers the front differential in order to improve CV angles at full suspension droop. Polyurethane mounting bushings replace the soft OE bushings to help limit differential movement under load. These brackets will endure the elements with their CNC laser cut steel construction with a semi-gloss black powder coat finish for corrosion resistance.
Features & Benefits
- Icon Diff Drop kit is a Vehicle specific design for 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Lexus GX550
- Drops front differential to provide better maximum operating angle for CV joints
- CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
- Polyurethane bushings limit deflection and prevent differential movement under load
- 100% Bolt-on with no cutting or welding necessary for installation
- Installation Guide
Icon Diff Drop kit Tech Info:
- TECH NOTE: Compatible with all 4WD Tundras/Sequoias, required for installation of ICON coilover kits on 4WD Tundras/Sequoias WITHOUT TRD Off-Road Suspension Package
- TECH NOTE: Required for installation of ICON coilover kits on GX550
Vehicle Fitment:
2022 Toyota Tundra
2023 Toyota Tundra
2024 Toyota Tundra
2025 Toyota Tundra
2023 Toyota Sequoia
2024 Toyota Sequoia
2025 Toyota Sequoia
2024 Lexus GX550
2025 Lexus GX550
2026 Lexus GX550
2025 Lexus GX550
2026 Lexus GX550
8 reviews for Icon 55156 Diff Drop Kit | 22+ Tundra, 23+ Sequoia, 24+ GX550
Add a review Cancel reply
You must be logged in to post a review.
You may also like…
-
Dobinsons
Dobinsons DD59-542K Front Diff Drop Kit | Tundra Sequoia GX550
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia and 2024+ Lexus GX550
- Keeps CV angles at a good working angle when lifted
- Suitable for lifts over 2.0″
- Includes all necessary hardware
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Guide
Rated 5.00 out of 5(8 reviews)
Related products
-
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
Rated 5.00 out of 5(3 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. A 3″ front lift is 23″ for example. Some Tacoma’s come with 1″ lift from the factory
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
Rated 5.00 out of 5(13 reviews) -
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
Rated 5.00 out of 5(15 reviews)
Jose (verified owner) –
It’s exactly what I wanted.
Travis (verified owner) –
Very fast delivery.
William (verified owner) –
Good quality, really nice.
William (verified owner) –
Value for money, super satisfied.
Gregory (verified owner) –
Just what I needed.
Brian (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Gregory (verified owner) –
Great description on the page, easy to understand what I was buying.
Mark (verified owner) –
Would definitely buy from this site again.