You may be interested in…
-
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Bronco 2021-2024+
Ford Bronco Diff Cover by ARB | 2021+
- Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss\
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
$187.00 Select options -
Dobinsons
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
$135.00 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
$269.36 Add to cart -
Steering - Jeep JKShips FREE !!
within 48 US StatesRusty’s HD Aluminum Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- Massive 1.825″ 7075 Solid Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
$459.00 Add to cart -
Bronco 2021-2024+On Sale For Memorial Day!!
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
Original price was: $1,056.97.$951.00Current price is: $951.00. Select options
Cart totals
Subtotal | $19,388.83 |
---|---|
Shipping |
Shipping to FL. |
Tax | $1,454.22 |
Total | $21,474.05 |