Jeep Wrangler JL Aluminum Skid Plate Kit (3 Pcs) 3.6L V6 2018-2020

Name: Jeep Wrangler JL Aluminum Skid Plate Kit (3 Pcs) 3.6L V6 2018-2020
Brand: Asfir 4x4
SKU: 547460B
Availability: InStock
Rating: 5.00 (8 reviews)

Rated 5.00 out of 5 based on 8 customer ratings

Suits 2018-2020 Jeep Wrangler JL with the 3.6L Gas Engine
2021+ models use This Other Kit
The Jeep Wrangler JL Underbody Protection Kit (3 Pcs) contains: Transfer Case skid plate (547465), Engine & Gear skid plate (547460C), Fuel Tank skid plate LWB/SWB (547474 / 547472).
Optional add-on below: Rear e-Torque Battery Skid Plate
Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
‌Cleverly engineered to provide optimal protection to the ‌vulnerable under-vehicle components.
‌‌Designed specifically to complement the JL’s structure, and minimize clearance loss.
‌Built with stiffening and reinforcing ribs to provide even greater strength where needed.
‌‌Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
‌Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
‌No cutting or drilling is required. Completely bolt-on.
‌The package includes all needed hardware.
‌Weighs in at 30 kg (66 lbs).
‌‌‌Proudly made in Israel.

Original price was: $1,126.00.Current price is: $1,070.00.

In Stock

Choose Fuel Tank Skid Plate Size: *

Add Rear e-Torque Battery Skid Plate? *

Fits on e-Torque models with a 3.6L/2.0L petrol engine. The Jeep Wrangler JL – Rear Battery Skid Plate is constructed using high-quality laser-cut 4mm aluminum, providing maximum strength with minimum added weight. See images above

SKU: 547460B Categories: Armor, Asfir 4x4, JL Wrangler (2018-2025+), Skid Plates, Skid Plates - JL Wrangler Brand: Asfir 4x4

Description
Additional information

Description

When taking your Jeep Wrangler JL off-road, adding an underbody protection kit is essential for safeguarding key components and enhancing the durability of your vehicle. Specifically designed for 2018-2020 Jeep Wrangler JL with a 3.6L gas engine, this underbody protection kit includes a transfer case skid plate, an engine & transmission skid plate, and a fuel tank skid plate, all made from high-quality, laser-cut 1/4″ aluminum. This design ensures maximum strength while keeping the weight minimal for improved performance on rugged terrains.

The Optional Jeep Wrangler JL – Rear e-torque Battery Skid Plate Fits on e-Torque models with a 3.6L/2.0L petrol engine and is constructed using high-quality laser-cut 4mm aluminum, providing maximum strength with minimum added weight. See images above

The Jeep Wrangler JL aluminum skid plate kits are cleverly engineered to provide optimal protection, especially for the transfer case, and are designed to fit the Wrangler’s structure without sacrificing clearance. Built with stiffening and reinforcing ribs, these plates offer enhanced strength where it’s needed most, while their direct bolt-on installation makes setup straightforward—no cutting or drilling required. With ventilation openings to prevent heat build-up and drain holes to remove debris, dirt, or water, these plates help keep your Jeep operating smoothly during off-road adventures. Additionally, the kit is supported by zinc-coated steel brackets for extra durability, ensuring it will stand up to tough conditions.

This Jeep Wrangler JL aluminum skid plate kit weighs 30 kg (66 lbs) and includes all necessary hardware for installation. Proudly made in Israel, it offers the peace of mind you need to tackle off-road challenges without worrying about damaging critical components.

About Asfir

Asfir was founded in 1986 in a small farmers’ village right below Nazareth mountains and looking over Mt. Tabor in northern Israel, and now many years later, these products are stocked in the USA as well.

ASFIR started as a small family business to become what it is today – a global off-road vehicle accessories manufacturer. After discharge from military service with the Israeli Special Forces, ASFIR founders decided to use the experience and knowledge they acquired during their service and apply it to a big love in life – off-roading and traveling in Israel.

This is how Asfir 4×4 came to be. Based on lifelong experience, knowledge, and deep understanding of the off-roading driving needs Asfir develops and models its products to be the best product needed – both functionally and economically.

The integration of the expert departments at ASFIR: research & development, production, import & export, service, and sales creates a unique human mixture, which contributes to the company’s innovation and professionalism.

The company’s plant is equipped with the latest machinery and advanced technology, including specially built dedicated machines, which enable the company’s development team to design and produce a considerable variety of products. ASFIR leads the Israeli off-road accessories market for over 35 years with in-house engineering design and manufacturing.

Our skid-plates are made from 1/4″ quality aluminum and laser cut for accuracy. We design our skids so that no drilling, welding, or cutting is required. Being a tailor-made mass-production company, we have the experience to manufacture top-quality products to fit your car perfectly.

We work under the close supervision of the Israeli Standard Institute & Ministry of Transportation and uphold the highest quality standard ISO 9001:2015.

We deliver our Israeli-made products all over the world directly from Israel and now from the USA.