ARB Jeep Wrangler JL and Gladiator Rubicon Rear Diff Cover Black 0750012
ARB Jeep Wrangler JL and Gladiator Rubicon Rear Diff Cover Red 0750012

Jeep Wrangler JL & Gladiator Rubicon Rear Diff Cover by ARB

(3 customer reviews)
  • Suits Jeep Gladiator JT and Wrangler JL 2-door and 4-door models with Dana 44 Rubicon Rear Axle
  • ONLY FOR RUBICON MODELS
  • High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
  • Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
  • Approach/departure angle optimized by angled exterior surface
  • Prolonged carrier bearing life due to extra support to the bearing alignment
  • Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
  • Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
  • Low profile drain plug design resists damage from obstacles
  • Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
  • Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
  • Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
  • Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
  • Made in Red or Black, choose below

$195.95

In Stock

Select Color * 

Choose what color you would like. If that is not available, we will be in touch with an ETA or other options that are in stock

Share (0)
Total: 0 Total: 0
EAN: 9332018060846 SKU: 0750012-JEEPJLJT Categories: , , , , , Brand:

Description

DESIGN AND DEVELOPMENT

The Jeep Wrangler JL & Gladiator Rubicon Rear Diff Cover from ARB, ARB’s Differential Cover has been specifically engineered to protect the differential, ring and pinion set, and your ARB Air Locker® from any off-road hazards. ARB engineers have confirmed fitment of the differential cover for the Jeep Wrangler JL & Gladiator Rubicon. The iconic Jeep Wrangler JL & Gladiator Rubicon diff covers come in red and black and are a great addition to the already extensive range which exists for the Dana, Chrysler, Ford and Chevrolet differential housings.

KEY FEATURES

• High-tensile nodular iron structure protects differential and ring and pinion set from obstacles

• Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss

• Approach/departure angle optimized by angled exterior surface

• Prolonged carrier bearing life due to extra support to the bearing alignment

• Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength

• High-quality and strong-neodymium magnets are used in both the drain plug and the dipstick to attract metallic wear particles eliminating premature wear

• Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil

• Low profile drain plug design resists damage from obstacles

• Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil

• Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles

• Jeep Wrangler JL & Gladiator Rubicon Diff Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long lasting finish; all hardware is hardened and plated

• Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws

To see all Jeep Wrangler and Gladiator products that Exit Offroad offers, check it out here: Jeep Products

Vehicle Fitment:
2018 Jeep Wrangler
2019 Jeep Wrangler
2020 Jeep Wrangler
2021 Jeep Wrangler
2022 Jeep Wrangler
2023 Jeep Wrangler
2024 Jeep Wrangler
2020 Jeep Gladiator
2021 Jeep Gladiator
2022 Jeep Gladiator
2023 Jeep Gladiator
2024 Jeep Gladiator

3 reviews for Jeep Wrangler JL & Gladiator Rubicon Rear Diff Cover by ARB

  1. Charles (verified owner) –

    Very fast delivery.

  2. Bradley (verified owner) –

    Great description on the page, easy to understand what I was buying.

  3. Patrick (verified owner) –

    5 Stars!!

Add a review

You may also like…

    • Dobinsons 3" MRA Suspension Kit for Jeep Wrangler JL
    • Dobinsons MRA Shock Cutout
    Dobinsons
    FREE SHIPPING
    within 48 US States

    Dobinsons 3″ MRA Suspension Kit for Jeep Gladiator JT
    • For 2020+ Jeep Gladiator JT 2020+
    • Select from different coil spring options below
    • Complete MRA suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to the additional accessory load (weight) on the vehicle
    • 3-way adjustable valving – adjust high and low speed compression and rebound
    • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
    • External Remote Oil Reservoir with dual speed compression adjustment
    • Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
    • Triple Lip Oil Seal for Superior Lifespan
    • Direct Bolt-on, Fully Rebuildable Design
    • Pre-Charged with Nitrogen, Ready to be Assembled and Installed
    • EDP Surface Protection, 3mm Heavy Duty Wall Thickness
    • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
    • Full 2 year limited warranty, no set rebuild time period
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Base Kit Includes 2 Front MRA Monotube Shocks, 2 Rear MRA Monotube Shocks, and 4 Coil Springs – Select your preferences
    (9 reviews)
    From $3,240.00 Select options
  • JGJTPA Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6
    • JGJTPA Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6
    • Jeep Gladiator Long Range Auxiliary Fuel Gas Tank for 2019+ models, adds a 2nd fuel tank with an additional 17 gallon capacity, 77% increase!!
    • Jeep Gladiator Long Range Auxiliary Fuel Gas Tank for 2019+ models, adds a 2nd fuel tank with an additional 17 gallon capacity, 77% increase!!
    Gladiator JT (2020-2024+)

    Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6
    • Suits Jeep Gladiator JT Trucks from 2020 onwards with the 3.6L V6 Gas engine
    • Not suitable for Diesel versions
    • This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
    • 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
    • 17 gallons plus your original 22 gallon tank gives you a capacity of 39 gallons in total!!
    • Tank fills using the OEM gas door and supplied parts
    • Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
    • Exhaust modification required – exhaust needs to be replaced with aftermarket/custom or available LRA replacement exhaust kit listed below (tank goes where OE exhaust was routed).  Exhaust kit components
    • Fitting time – approximately 5.5 hours
    • Part Number JGJTPA
    • Fitting Instructions – Intended to be installed by a certified mechanic
    • This item ships on a pallet to the nearest Truck Freight terminal for you to pickup.  We will be in touch with you regarding the nearest freight terminal, unless you add home delivery fee below.
    • This product can not be sold or shipped to residents in California, as it will not pass SMOG.  Do not order this product if you live in California!!
    • MADE IN AUSTRALIA
    (5 reviews)
    $2,245.00 Select options

Related products

  • ARB730LB 3" x 10' Tree Saver Strap - 26500 lbs Capacity, Green
    • ARB730LB 3" x 10' Tree Saver Strap - 26500 lbs Capacity, Green
    • ARB Tree Saver Strap - 26500 lbs Capacity, Green
    ARB

    ARB730LB 3″ x 10′ Tree Saver Strap – 26500 lbs Capacity, Green
    • Tree Strap measures 3″ wide x 10′ long
    • Brand ARB
    • 100 percent polyester
    • Tree straps are designed to hold firm; no stretching
    • Reinforced eyes
    • Eye and seam protector sleeve
    • Not to be used to as a snatch strap, since this strap does not stretch.  Also available in a longer version
    (12 reviews)
    $48.95 Add to cart
  • ARB710LB Orange Snatch Strap Recovery 30' x 3 1/4" (24000 LB)
    • ARB710LB Orange Snatch Strap Recovery 30' x 3 1/4" (24000 LB)
    • ARB710LB Orange Snatch Strap Recovery 30' x 3 1/4" (24000 LB)
    • ARB710LB Orange Snatch Strap Recovery 30' x 3 1/4" (24000 LB)
    ARB

    ARB710LB Orange Snatch Strap Recovery 30′ x 3 1/4″ (24000 LB)
    • A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
    • Min. breaking strength: 12,500kg / 24000lb Specifically designed to stretch under load for maximum performance
    • An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
    • Length: 9m / 30 feet. Width: 80mm / 3 1/4″ 
    • Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
    • Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
    • All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
    • Part no. ARB710LB
    • Min. breaking strength: 12,500kg/24000lb
    • Length: 9m / 30 feet
    • Width: 80mm / 3 1/4″
    • Elasticity: Stretch (genuine) 20%
    • Material: 100% nylon
    • Reinforced eyes: yes
    • Eye & seam protector sleeves: yes
    (9 reviews)
    $96.95 Add to cart
  • ARB705LB Orange Snatch Strap Recovery 30' x 2 3/8" (17500 LB)
    • ARB705LB Orange Snatch Strap Recovery 30' x 2 3/8" (17500 LB)
    • ARB705LB Orange Snatch Strap Recovery 30' x 2 3/8" (17500 LB)
    • ARB705LB Orange Snatch Strap Recovery 30' x 2 3/8" (17500 LB)
    ARB

    ARB705LB Orange Snatch Strap Recovery 30′ x 2 3/8″ (17500 LB)
    • A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
    • Min. breaking strength: 8,000kg / 17,600 lb Specifically designed to stretch under load for maximum performance
    • An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
    • Length: 9m / 30 feet. Width: 60mm / 2 1/8″ feet
    • Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
    • Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
    • All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
    • Part no. ARB705LB
    • Min. breaking strength: 8,000kg/17,600lb
    • Length: 9m / 30 feet
    • Width:  60mm / 2 1/8″
    • Elasticity: Stretch (genuine) 20%
    • Material: 100% nylon
    • Reinforced eyes: yes
    • Eye & seam protector sleeves: yes
    (11 reviews)
    $70.95 Add to cart
  • ARB 5423010 Under Vehicle Protection Kit | Toyota Tacoma 2005+ 4x4
    • ARB 5423010 Under Vehicle Protection Kit | Toyota Tacoma 2005+ 4x4
    • ARB UVP installed on vehicle
    Skid Plates
    FREE SHIPPING
    within 48 US States

    ARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
    • Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
    • 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
    • Laser cut sheet steel.
    • Zinc plated and powder coated with a silver textured finish.
    • Recessed mounting bolts are protected and easy to remove for vehicle servicing.
    • The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
    • Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
    • See more details below as well as product video
    (11 reviews)
    $998.95 Add to cart