You may be interested in…
-
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-111-R-R3 & L59-112-R-R5 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
$5.00 Add to cart -
Dobinsons
Dobinsons Front 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the front
$30.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesWarn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 14.2″ compressed length, 24.2″ extended length
- Installation Instructions
- Works with factory brake line length and OE bump stop length, no extensions required
- Includes reservoir brackets and hardware
- SOLD IN PAIRS
$1,150.00 Add to cart -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDobinsons MRA59-A710 3-Way Adjustable MRA Front Struts | Tundra 2007-2021
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
$1,790.00 Add to cart -
60 62 Series Land Cruiser (1980-1989)
Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota
- Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
$100.00 Add to cart -
Bump Stops
Wheeler’s Rear Superbumps for 95+ Tacoma and 99-06 Tundra
- Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
$221.00 Add to cart -
Brake Lines
Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
$95.00 Add to cart -
Front Bumpers
WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$999.99 Add to cart -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
$120.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesETA is July 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
Bronco 2021-2024+On Sale For Memorial Day!!
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
Original price was: $1,056.97.$951.00Current price is: $951.00. Select options -
Excluded
Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)
- Suits 2005-2023 Toyota Tacoma. Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Sold as a pair – they are not side-specific
$590.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesWarn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
ExceptionsShips FREE !!
within 48 US StatesDobinsons MRA59-A700 3-Way Adjustable MRA Front Struts
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 3″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart -
Bronco 2021-2024+
Ford Bronco Diff Cover by ARB | 2021+
- Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss\
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
$187.00 Select options
Cart totals
Subtotal | $28,402.86 |
---|---|
Shipping |
Shipping to FL. |
Tax | $2,130.29 |
Total | $31,794.15 |