Sale!
RCI Rear Diff Skid Plate 03-09 4Runner GX470
RCI Rear Diff Skid Plate 03-09 4Runner GX470
RCI Rear Diff Skid Plate 03-09 4Runner GX470
RCI Rear Diff Skid Plate 03-09 4Runner GX470
RCI Rear Diff Skid Plate 03-09 4Runner GX470
RCI Rear Diff Skid Plate 03-09 4Runner GX470

RCI Rear Diff Skid Plate | 03-09 4Runner GX470

(4 customer reviews)
  • Suits Toyota 4Runner 4th Gen 2003-2009 and Lexus GX470 WITHOUT KDSS
  • Protects the low hanging rear differential
  • Clamps directly to axle housing for an easy no drill install
  • Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
  • Black powder coated for rust resistant, durable and high quality finish
  • Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
  • Installs in minutes
  • All hardware and installation instructions provided
  • Direct bolt on addition to existing factory attachment points, no drilling required
  • MADE IN THE USA

Original price was: $324.99.Current price is: $276.00.

In Stock
Share (0)
Total: 0 Total: 0
SKU: 4G4R-DIFFSKID Categories: , , , , , , , Brand:

Description

Underbody damage is costly. Protect your investment with an RCI GX470 Diff skid, the ultimate defense for all on and off-road hazards.

Built of laser cut 3/16” steel, this plate is custom fit to protect the rear differential of all 4th generation 2010-Present 4Runners and Lexus GX470 with premium quality, fit and finish.

**WILL NOT FIT KDSS MODELS**       

 

GX470 Diff Skid KEY FEATURES

  • Protects the low hanging rear differential
  • Clamps directly to axle housing for an easy no drill install
  • Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
  • Black powder coated for rust resistant, durable and high quality finish
  • Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
  • Installs in minutes
  • All hardware and installation instructions provided
  • This GX470 Diff Skid Plate is a Direct bolt on addition to existing factory attachment points, no drilling required

MADE IN USA

RCI Metalworks LLC (DBA RCI Off Road) is a Colorado based company owned and operated out of Loveland, Colorado. We specialize in the manufacturing of aftermarket truck and SUV accessories. We are passionate about what we do and the products we build, which is why each of our products are carefully engineered and thoroughly tested to ensure an innovative solution that will exceed the needs of our customers.

At RCI we proudly engineer and manufacture all of our products in house at our Loveland, CO Location. This differentiates us within the industry and allows us to offer the absolute best products with extremely competitive prices.

Our in-house manufacturing processes include:

  • CNC Fiber Laser Cutting of Sheet Metal
  • CNC Fiber Laser Tube Cutting
  • CNC Press Brake Forming
  • Robotic welding
  • Mig and Tig Welding of Steel and Aluminum
  • CNC Tube Bending and Notching
  • Fully automated powder coating line with 4 stage wash system and integrated primer coating
  • In-house R&D and CAD design utilizing 3D scanning and FEA
  • Warehousing, Packaging, and Shipping
  • And much more!

Vehicle Fitment:

2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner

2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470

Additional information

Weight 22 lbs
Dimensions 27 × 14 × 6 in

4 reviews for RCI Rear Diff Skid Plate | 03-09 4Runner GX470

  1. Stephen (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  2. Kenneth (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  3. Sean (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  4. Bryan (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

Add a review

Related products

  • Sale! Dobinsons Upper Control Arms UCAs
    • Dobinsons Upper Control Arms UCAs
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    Exceptions
    On Sale All November!!

    Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
    • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height, as factory alignment correction will be enhanced with these
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Curved washers face outwards away from bushings during installation, per the product video
    • Product Video
    • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
    • Also sold without ball joints
    • Replacement Ball Joints can be ordered here
    (8 reviews)
    Original price was: $795.00.Current price is: $675.75. Add to cart
  • Sale! Dobinsons variable rate rear coil springs pair
    • Dobinsons variable rate rear coil springs pair
    • Dobinsons C59-701V installed
    • Dobinsons C59-701V installed
    Dobinsons
    On Sale All November!!

    Dobinsons C59-677V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 500mm free height, 16mm wire diameter, 157-230LBF/IN variable spring Rate
    (23 reviews)
    Original price was: $305.00.Current price is: $259.25. Select options
  • Sale! Dobinsons twin tube strut and shock black shocks and black coils
    • Dobinsons twin tube strut and shock black shocks and black coils
    • Dobinsons twin tube strut and shock yellow shocks and teal coils
    • Dobinsons twin tube strut and shock yellow shocks and black coils
    Suspension
    On Sale All November!!

    Dobinsons Lift Kit for Toyota 4Runner 4×4 2003-2009 (All Options 0-3.5″)
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
    • Coils are specifically suited to the additional accessory load (weight) on the vehicle
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Base Kit Price Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
    • For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
    • You can choose from Dobinsons Classic Twin Tube Shocks, IMS Monotube, or MRA remote resi shocks with 3-way valving adjustment
    (12 reviews)
    Original price was: $1,200.00.Current price is: $1,020.00. Select options
  • Sale! Dobinsons rear coil springs in teal color
    • Dobinsons rear coil springs in teal color
    • Black Dobinsons Coils color
    • Red Dobinsons Coils color
    Dobinsons
    On Sale All November!!

    Dobinsons C59-505 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 405mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
    • Add a PS59-4025 trim spacer if used with KDSS
    (22 reviews)
    Original price was: $270.00.Current price is: $229.50. Select options