Your cart is currently empty!
RCI Rear Diff Skid Plate | 07-21 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
$375.99
In Stock
SKU: TUN-07-DIFF
Categories: Accessories, Armor, RCI Off Road, Skid Plates, Skid Plates, Sliders, Bumpers, Racks - Tundra 2nd Gen, Tundra 2nd Gen (2007-2021)
Brand: RCI Offroad
Description
Tundra Rear Diff Skid DETAILS
Underbody damage is costly. Protect your investment with an RCI Tundra Rear Diff Skid, the ultimate defense for all on and off-road hazards.
Built with laser cut 3/16” steel, this plate is custom fit to protect the rear differential of all 2007-2021 Tundras.
Tundra Rear Diff Skid KEY FEATURES
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
**Please see our “Current Lead Times” tab for the most up to date information!
Tundra Rear Diff Skid INSTALL GUIDE
RCI Offroad is a Colorado based company owned and operated out of Loveland, Colorado. We specialize in the manufacturing of aftermarket truck and SUV accessories. We are passionate about what we do and the products we build, which is why each of our products are carefully engineered and thoroughly tested to ensure an innovative solution that will exceed the needs of our customers.
At RCI we proudly engineer and manufacture all of our products in house at our Loveland, CO Location. This differentiates us within the industry and allows us to offer the absolute best products with extremely competitive prices.
Our in-house manufacturing processes include:
- CNC Fiber Laser Cutting of Sheet Metal
- CNC Fiber Laser Tube Cutting
- CNC Press Brake Forming
- Robotic welding
- Mig and Tig Welding of Steel and Aluminum
- CNC Tube Bending and Notching
- Fully automated powder coating line with 4 stage wash system and integrated primer coating
- In-house R&D and CAD design utilizing 3D scanning and FEA
- Warehousing, Packaging, and Shipping
- And much more!
Vehicle Suitability:
2007 Toyota Tundra
2008 Toyota Tundra
2009 Toyota Tundra
2010 Toyota Tundra
2011 Toyota Tundra
2012 Toyota Tundra
2013 Toyota Tundra
2014 Toyota Tundra
2015 Toyota Tundra
2016 Toyota Tundra
2017 Toyota Tundra
2018 Toyota Tundra
2019 Toyota Tundra
2020 Toyota Tundra
2021 Toyota Tundra
Additional information
| Weight | 28 lbs |
|---|---|
| Dimensions | 31 × 16 × 6 in |
6 reviews for RCI Rear Diff Skid Plate | 07-21 Tundra
You must be logged in to post a review.
Related products
-
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews) -
Tundra 2nd Gen (2007-2021)
RCI Full Skid Plate Set | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front, transmission/transfer-case skid plates
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
(9 reviews)
Brian (verified owner) –
Value for money, super satisfied.
David (verified owner) –
Good quality, really nice.
Robert (verified owner) –
*****
Jose (verified owner) –
This is my go-to now for off road parts.
Benjamin (verified owner) –
I received it really fast.
Edward (verified owner) –
5 Stars!!